---
product: Chilkat
product_version: 11.7.0
language: delphix
language_label: Delphi ActiveX
class: Stream
class_name: TChilkatStream
license: free
deprecated: false
reference_html: https://www.chilkatsoft.com/refdoc/delphiStreamRef.html
---
# Chilkat Stream — Delphi ActiveX — v11.7.0

> Chilkat 11.7.0 · language=delphix · class=Stream (TChilkatStream)
> Other versions: replace `11.7.0` in this URL. Other languages: `https://www.chilkatsoft.com/ai-docs/v/11.7.0/<lang>/classes/Stream.md`.
> Language-wide rules (install, unlock, error model, strings/bytes): `https://www.chilkatsoft.com/ai-docs/v/11.7.0/delphix/guide.md`.

## Purpose

**Read, write, pipe, monitor, and control byte or text streams.**

`Chilkat.Stream` is a general-purpose streaming object for moving data between sources and sinks without requiring the entire payload to be handled at once. A stream can read from files, byte arrays, strings, or other sources; write to files, memory, `BinData`, `StringBuilder`, or other sinks; handle binary and text data; apply character-set rules for strings; process file parts; track bytes sent and received; and support timeouts, polling, aborts, async task integration, and end-of-stream handling.

**File and memory sources**

Stream from a source file, byte array, string, or selected file part without manually loading or copying all data first.

**File and object sinks**

Write streamed data to a sink file, append to an existing file, or output to `BinData`, `StringBuilder`, bytes, or strings.

**Binary reads and writes**

Read or write raw bytes, fixed byte counts, encoded byte strings, individual bytes, or `BinData` content.

**Text streaming**

Read and write strings using `StringCharset`, optionally use a BOM, and read text until CRLF or a matching delimiter.

**Timeouts and polling**

Control read and write wait behavior, poll for immediately available data, and inspect read or write failure reasons.

**Progress and lifecycle**

Track bytes sent and received, detect end-of-stream or write-closed state, reset streams, close writing, and abort long-running operations.

**Common pattern:** Configure the stream's source and sink, set the character set or chunk size if needed, then read or write using the method that matches the data type: bytes, encoded bytes, strings, `BinData`, or `StringBuilder`. Check `EndOfStream`, `ReadFailReason`, `WriteFailReason`, `NumReceived`, `NumSent`, and `LastErrorText` to understand stream progress and failures.

**Timeout note:** For `ReadTimeoutMs`, a value of `0` means a polling read, not an infinite timeout. For `WriteTimeoutMs`, `0` means return immediately if the stream cannot be written to right away.

## Object creation, unlocking and error handling

**Object Creation**

```pascal
var
obj: TChilkatStream;
...
begin
obj := TChilkatStream.Create(Self);
...
// When finished, free the object instance.
obj.Free();
```

Call `Global.UnlockBundle` once at the start of the program, before using this or any other Chilkat class. Any string unlocks a fully functional 30-day trial; a purchased unlock code is used in production. See `guide.md` for the exact code in Delphi ActiveX.

How failure is reported depends on the method's return type and is stated in the note under each method below. In every case the diagnostic text is in the `LastErrorText` property of the object whose method was called.

## Members common to every Chilkat class

Documented once per language in `common-members.md`; listed here so this page is self-contained.

| Property | Signature | Access | Meaning |
|---|---|---|---|
| `DebugLogFilePath` | `property DebugLogFilePath: WideString` | read/write | If set to a file path, this property logs the LastErrorText of each Chilkat method or property call to the specified file. |
| `LastBinaryResult` | `property LastBinaryResult: OleVariant readonly` | read-only | This property is mainly used in SQL Server stored procedures to retrieve binary data from the last method call that returned binary data. |
| `LastErrorHtml` | `property LastErrorHtml: WideString readonly` | read-only | Provides HTML-formatted information about the last called method or property. |
| `LastErrorText` | `property LastErrorText: WideString readonly` | read-only | Provides plain text information about the last called method or property. |
| `LastErrorXml` | `property LastErrorXml: WideString readonly` | read-only | Provides XML-formatted information about the last called method or property. |
| `LastMethodSuccess` | `property LastMethodSuccess: Integer` | read/write | Indicates the success or failure of the most recent method call: `1` means success, `0` means failure. |
| `LastStringResult` | `property LastStringResult: WideString readonly` | read-only | In SQL Server stored procedures, this property holds the string return value of the most recent method call that returns a string. |
| `LastStringResultLen` | `property LastStringResultLen: Integer readonly` | read-only | The length, in characters, of the string contained in the LastStringResult property. |
| `VerboseLogging` | `property VerboseLogging: Integer` | read/write | If set to `1`, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. |
| `Version` | `property Version: WideString readonly` | read-only | Version of the component/library, such as "10.1.0" |

## Member index

| Member | Kind | Signature |
|---|---|---|
| `AbortCurrent` | property, read/write | `property AbortCurrent: Integer` |
| `CanRead` | property, read-only | `property CanRead: Integer readonly` |
| `CanWrite` | property, read-only | `property CanWrite: Integer readonly` |
| `DataAvailable` | property, read-only | `property DataAvailable: Integer readonly` |
| `DefaultChunkSize` | property, read/write | `property DefaultChunkSize: Integer` |
| `EndOfStream` | property, read-only | `property EndOfStream: Integer readonly` |
| `HeartbeatMs` | property, read/write | `property HeartbeatMs: Integer` |
| `IsWriteClosed` | property, read-only | `property IsWriteClosed: Integer readonly` |
| `Length32` | property, read/write | `property Length32: Integer` |
| `ReadFailReason` | property, read-only | `property ReadFailReason: Integer readonly` |
| `ReadTimeoutMs` | property, read/write | `property ReadTimeoutMs: Integer` |
| `SinkFile` | property, read/write | `property SinkFile: WideString` |
| `SinkFileAppend` | property, read/write | `property SinkFileAppend: Integer` |
| `SourceFile` | property, read/write | `property SourceFile: WideString` |
| `SourceFilePart` | property, read/write | `property SourceFilePart: Integer` |
| `SourceFilePartSize` | property, read/write | `property SourceFilePartSize: Integer` |
| `StringBom` | property, read/write | `property StringBom: Integer` |
| `StringCharset` | property, read/write | `property StringCharset: WideString` |
| `WriteFailReason` | property, read-only | `property WriteFailReason: Integer readonly` |
| `WriteTimeoutMs` | property, read/write | `property WriteTimeoutMs: Integer` |
| `LoadTaskCaller` | method | `function LoadTaskCaller(task: IChilkatTask): Integer;` |
| `ReadBd` | method | `function ReadBd(binData: IChilkatBinData): Integer;` |
| `ReadBytes` | method | `function ReadBytes(): OleVariant;` |
| `ReadBytesENC` | method | `function ReadBytesENC(encoding: WideString): WideString;` |
| `ReadNBytes` | method | `function ReadNBytes(numBytes: Integer): OleVariant;` |
| `ReadNBytesENC` | method | `function ReadNBytesENC(numBytes: Integer; encoding: WideString): WideString;` |
| `ReadSb` | method | `function ReadSb(sb: IChilkatStringBuilder): Integer;` |
| `ReadString` | method | `function ReadString(): WideString;` |
| `ReadToCRLF` | method | `function ReadToCRLF(): WideString;` |
| `ReadUntilMatch` | method | `function ReadUntilMatch(matchStr: WideString): WideString;` |
| `Reset` | method | `procedure Reset();` |
| `SetSourceBytes` | method | `function SetSourceBytes(sourceData: OleVariant): Integer;` |
| `SetSourceString` | method | `function SetSourceString(srcStr: WideString; charset: WideString): Integer;` |
| `ToDecimalStr` | method | `function ToDecimalStr(propertyName: WideString): WideString;` |
| `WriteBd` | method | `function WriteBd(binData: IChilkatBinData): Integer;` |
| `WriteByte` | method | `function WriteByte(byteVal: Integer): Integer;` |
| `WriteBytes` | method | `function WriteBytes(byteData: OleVariant): Integer;` |
| `WriteBytesENC` | method | `function WriteBytesENC(byteData: WideString; encoding: WideString): Integer;` |
| `WriteClose` | method | `function WriteClose(): Integer;` |
| `WriteSb` | method | `function WriteSb(sb: IChilkatStringBuilder): Integer;` |
| `WriteString` | method | `function WriteString(str: WideString): Integer;` |

## Properties

### Stream.AbortCurrent

`Chilkat 11.7.0 · delphix · Stream · AbortCurrent · property · read/write · since 9.5.0.58`

```pascal
property AbortCurrent: Integer
```

When set to `1`, causes the currently running method to abort. Methods that always finish quickly (i.e.have no length file operations or network communications) are not affected. If no method is running, then this property is automatically reset to `0` when the next method is called. When the abort occurs, this property is reset to `0`. Both synchronous and asynchronous method calls can be aborted. (A synchronous method call could be aborted by setting this property from a separate thread.)

### Stream.CanRead

`Chilkat 11.7.0 · delphix · Stream · CanRead · property · read-only · since 9.5.0.56`

```pascal
property CanRead: Integer readonly
```

`1` if the stream supports reading. Otherwise `0`.

**Note:** A stream that supports reading, which has already reached the end-of-stream, will still have a CanRead value of `1`. This property indicates the stream's inherent ability, and not whether or not the stream can be read at a particular moment in time.

### Stream.CanWrite

`Chilkat 11.7.0 · delphix · Stream · CanWrite · property · read-only · since 9.5.0.56`

```pascal
property CanWrite: Integer readonly
```

`1` if the stream supports writing. Otherwise `0`.

**Note:** A stream that supports writing, which has already been closed for write, will still have a CanWrite value of `1`. This property indicates the stream's inherent ability, and not whether or not the stream can be written at a particular moment in time.

### Stream.DataAvailable

`Chilkat 11.7.0 · delphix · Stream · DataAvailable · property · read-only · since 9.5.0.56`

```pascal
property DataAvailable: Integer readonly
```

`1` if it is known for sure that data is ready and waiting to be read. `0` if it is not known for sure (it may be that data is immediately available, but reading the stream with a ReadTimeoutMs of 0, which is to poll the stream, is the way to find out).

### Stream.DefaultChunkSize

`Chilkat 11.7.0 · delphix · Stream · DefaultChunkSize · property · read/write · since 9.5.0.56`

```pascal
property DefaultChunkSize: Integer
```

The default internal chunk size for reading or writing. The default value is 65536. If this property is set to 0, it will cause the default chunk size (65536) to be used. Note: The chunk size can have significant performance impact. If performance is an issue, be sure to experiment with different chunk sizes.

### Stream.EndOfStream

`Chilkat 11.7.0 · delphix · Stream · EndOfStream · property · read-only · since 9.5.0.56`

```pascal
property EndOfStream: Integer readonly
```

`1` if the end-of-stream has already been reached. When the stream has already ended, all calls to Read\* methods will return `0` with the ReadFailReason set to 3 (already at end-of-stream).

### Stream.HeartbeatMs

`Chilkat 11.7.0 · delphix · Stream · HeartbeatMs · property · read/write · since 9.5.0.97`

```pascal
property HeartbeatMs: Integer
```

**Full documentation for this property (same in every language):** [Event Callback Examples](https://www.chilkatsoft.com/ai-docs/v/11.7.0/articles/event_callback_examples.md)

The interval in milliseconds between each `AbortCheck` event callback, which enables an application to abort certain method calls before they complete. **By default, HeartbeatMs is set to** `0`**, meaning no AbortCheck event callbacks will trigger.**

### Stream.IsWriteClosed

`Chilkat 11.7.0 · delphix · Stream · IsWriteClosed · property · read-only · since 9.5.0.56`

```pascal
property IsWriteClosed: Integer readonly
```

`1` if the stream is closed for writing. Once closed, no more data may be written to the stream.

### Stream.Length32

`Chilkat 11.7.0 · delphix · Stream · Length32 · property · read/write · since 9.5.0.58`

```pascal
property Length32: Integer
```

The length (in bytes) of the stream's source. If unknown, then this property will have a value of -1. This property may be set by the application if it knows in advance the length of the stream.

Setting this property also sets the Length property (which is a 64-bit integer).

### Stream.ReadFailReason

`Chilkat 11.7.0 · delphix · Stream · ReadFailReason · property · read-only · since 9.5.0.56`

```pascal
property ReadFailReason: Integer readonly
```

This property is automatically set when a Read\* method is called. It indicates the reason for failure. Possible values are:

0>
0. No failure (success)
1. Timeout, or no data is immediately available for a polling read.
2. Aborted by an application callback.
3. Already at end-of-stream.
4. Fatal stream error.
5. Out-of-memory error (this is very unlikely).

### Stream.ReadTimeoutMs

`Chilkat 11.7.0 · delphix · Stream · ReadTimeoutMs · property · read/write · since 9.5.0.56`

```pascal
property ReadTimeoutMs: Integer
```

The maximum number of seconds to wait while reading. The default value is 30 seconds (i.e. 30000ms). A value of 0 indicates a poll. (A polling read is to return with a timeout if no data is immediately available.)

**Important:** For most Chilkat timeout related properties, a value of 0 indicates an infinite timeout. For this property, a value of 0 indicates a poll. If setting a timeout related property (or method argument) to zero, be sure to understand if 0 means `wait forever` or `poll`.

The timeout value is not a total timeout. It is the maximum time to wait while no additional data is forthcoming.

### Stream.SinkFile

`Chilkat 11.7.0 · delphix · Stream · SinkFile · property · read/write · since 9.5.0.56`

```pascal
property SinkFile: WideString
```

Sets the sink to the path of a file. The file does not need to exist at the time of setting this property. The sink file will be automatically opened on demand, when the stream is first written.

**Note:** This property takes priority over other potential sinks. Make sure this property is set to an empty string if the stream's sink is to be something else.

### Stream.SinkFileAppend

`Chilkat 11.7.0 · delphix · Stream · SinkFileAppend · property · read/write · since 9.5.0.83`

```pascal
property SinkFileAppend: Integer
```

If `1`, the stream appends to the SinkFile rather than truncating and re-writing the sink file. The default value is `0`.

### Stream.SourceFile

`Chilkat 11.7.0 · delphix · Stream · SourceFile · property · read/write · since 9.5.0.56`

```pascal
property SourceFile: WideString
```

Sets the source to the path of a file. The file does not need to exist at the time of setting this property. The source file will be automatically opened on demand, when the stream is first read.

**Note:** This property takes priority over other potential sources. Make sure this property is set to an empty string if the stream's source is to be something else.

### Stream.SourceFilePart

`Chilkat 11.7.0 · delphix · Stream · SourceFilePart · property · read/write · since 9.5.0.59`

```pascal
property SourceFilePart: Integer
```

If the source is a file, then this property can be used to stream one part of the file. The SourceFilePartSize property defines the size (in bytes) of each part. The SourceFilePart and SourceFilePartSize have default values of 0, which means the entire SourceFile is streamed.

This property is a 0-based index. For example, if the SourceFilePartSize is 1000, then part 0 is for bytes 0 to 999, part 1 is for bytes 1000 to 1999, etc.

### Stream.SourceFilePartSize

`Chilkat 11.7.0 · delphix · Stream · SourceFilePartSize · property · read/write · since 9.5.0.59`

```pascal
property SourceFilePartSize: Integer
```

If the source is a file, then this property, in conjunction with the SourceFilePart property, can be used to stream a single part of the file. This property defines the size (in bytes) of each part. The SourceFilePart and SourceFilePartSize have default values of 0, which means that by default, the entire SourceFile is streamed.

### Stream.StringBom

`Chilkat 11.7.0 · delphix · Stream · StringBom · property · read/write · since 9.5.0.56`

```pascal
property StringBom: Integer
```

If `1`, then include the BOM when creating a string source via SetSourceString where the charset is utf-8, utf-16, etc. (The term `BOM` stands for Byte Order Mark, also known as the preamble.) Also, if `1`, then include the BOM when writing a string via the WriteString method. The default value of this property is `0`.

### Stream.StringCharset

`Chilkat 11.7.0 · delphix · Stream · StringCharset · property · read/write · since 9.5.0.56`

```pascal
property StringCharset: WideString
```

Indicates the expected character encoding, such as utf-8, windows-1256, utf-16, etc. for methods that read text such as: ReadString, ReadToCRLF, ReadUntilMatch. Also controls the character encoding when writing strings with the WriteString method. The supported charsets are indicated at the link below.

The default value is `utf-8`.

See also:

- [Charsets Supported by Chilkat](http://www.cknotes.com/chilkat-charsets-character-encodings-supported/)

### Stream.WriteFailReason

`Chilkat 11.7.0 · delphix · Stream · WriteFailReason · property · read-only · since 9.5.0.56`

```pascal
property WriteFailReason: Integer readonly
```

This property is automatically set when a Write\* method is called. It indicates the reason for failure. Possible values are:

0>
0. No failure (success)
1. Timeout, or unable to immediately write when the WriteTimeoutMs is 0.
2. Aborted by an application callback.
3. The stream has already ended.
4. Fatal stream error.
5. Out-of-memory error (this is very unlikely).

### Stream.WriteTimeoutMs

`Chilkat 11.7.0 · delphix · Stream · WriteTimeoutMs · property · read/write · since 9.5.0.56`

```pascal
property WriteTimeoutMs: Integer
```

The maximum number of seconds to wait while writing. The default value is 30 seconds (i.e. 30000ms). A value of 0 indicates to return immediately if it is not possible to write to the sink immediately.

## Methods

### Stream.LoadTaskCaller

`Chilkat 11.7.0 · delphix · Stream · LoadTaskCaller · method · since 9.5.0.80`

```pascal
function LoadTaskCaller(task: IChilkatTask): Integer;
```

Loads the caller of the task's async method.

Returns 1 for success, 0 for failure.

### Stream.ReadBd

`Chilkat 11.7.0 · delphix · Stream · ReadBd · method · since 9.5.0.67`

```pascal
function ReadBd(binData: IChilkatBinData): Integer;
```

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The incoming data is appended to `binData`.

Returns 1 for success, 0 for failure.

Async variant: `ReadBdAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.ReadBytes

`Chilkat 11.7.0 · delphix · Stream · ReadBytes · method · since 9.5.0.56`

```pascal
function ReadBytes(): OleVariant;
```

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive.

Returns a zero-length byte array (as an OleVariant) on failure.  
An empty array will have a VarArrayHighBound of -1 meaning 0 elements.

Async variant: `ReadBytesAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.ReadBytesENC

`Chilkat 11.7.0 · delphix · Stream · ReadBytesENC · method · since 9.5.0.56`

```pascal
function ReadBytesENC(encoding: WideString): WideString;
```

**Full documentation for this method (same in every language):** [Binary Encodings Supported by Chilkat](https://www.chilkatsoft.com/ai-docs/v/11.7.0/articles/binary_encodings.md)

The same as ReadBytes, except returns the received bytes in encoded string form. The `encoding` argument indicates the encoding, which can be `base64`, `hex`, or any of the multitude of encodings indicated in the link below.

Returns a zero-length WideString on failure

Async variant: `ReadBytesENCAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.ReadNBytes

`Chilkat 11.7.0 · delphix · Stream · ReadNBytes · method · since 9.5.0.56`

```pascal
function ReadNBytes(numBytes: Integer): OleVariant;
```

Reads exactly `numBytes` bytes from the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive.

Returns a zero-length byte array (as an OleVariant) on failure.  
An empty array will have a VarArrayHighBound of -1 meaning 0 elements.

Async variant: `ReadNBytesAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.ReadNBytesENC

`Chilkat 11.7.0 · delphix · Stream · ReadNBytesENC · method · since 9.5.0.56`

```pascal
function ReadNBytesENC(numBytes: Integer; encoding: WideString): WideString;
```

**Full documentation for this method (same in every language):** [Binary Encodings Supported by Chilkat](https://www.chilkatsoft.com/ai-docs/v/11.7.0/articles/binary_encodings.md)

The same as ReadNBytes, except returns the received bytes in encoded string form. The `encoding` argument indicates the encoding, which can be `base64`, `hex`, or any of the multitude of encodings indicated in the link below.

Returns a zero-length WideString on failure

Async variant: `ReadNBytesENCAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.ReadSb

`Chilkat 11.7.0 · delphix · Stream · ReadSb · method · since 9.5.0.67`

```pascal
function ReadSb(sb: IChilkatStringBuilder): Integer;
```

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is appended to `sb`. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to `utf-8` prior to calling ReadSb.

Returns 1 for success, 0 for failure.

Async variant: `ReadSbAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.ReadString

`Chilkat 11.7.0 · delphix · Stream · ReadString · method · since 9.5.0.56`

```pascal
function ReadString(): WideString;
```

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to `utf-8` prior to calling ReadString.

Returns a zero-length WideString on failure

Async variant: `ReadStringAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.ReadToCRLF

`Chilkat 11.7.0 · delphix · Stream · ReadToCRLF · method · since 9.5.0.56`

```pascal
function ReadToCRLF(): WideString;
```

Reads the stream until a CRLF is received. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to `utf-8` prior to calling ReadString.

Note: If the end-of-stream is reached prior to receiving the CRLF, then the remaining data is returned, and the ReadFailReason property will be set to 3 (to indicate end-of-file). This is the only case where as string would be returned that does not end with CRLF.

Returns a zero-length WideString on failure

Async variant: `ReadToCRLFAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.ReadUntilMatch

`Chilkat 11.7.0 · delphix · Stream · ReadUntilMatch · method · since 9.5.0.56`

```pascal
function ReadUntilMatch(matchStr: WideString): WideString;
```

Reads the stream until the string indicated by `matchStr` is received. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to `utf-8` prior to calling ReadString.

Note: If the end-of-stream is reached prior to receiving the match string, then the remaining data is returned, and the ReadFailReason property will be set to 3 (to indicate end-of-file). This is the only case where as string would be returned that does not end with the desired match string.

Returns a zero-length WideString on failure

Async variant: `ReadUntilMatchAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.Reset

`Chilkat 11.7.0 · delphix · Stream · Reset · method · since 9.5.0.56`

```pascal
procedure Reset();
```

Resets the stream. If a source or sink is open, then it is closed. Properties such as EndOfStream and IsWriteClose are reset to default values.

### Stream.SetSourceBytes

`Chilkat 11.7.0 · delphix · Stream · SetSourceBytes · method · since 9.5.0.56`

```pascal
function SetSourceBytes(sourceData: OleVariant): Integer;
```

Sets the stream's source to the contents of `sourceData`.

Returns 1 for success, 0 for failure.

### Stream.SetSourceString

`Chilkat 11.7.0 · delphix · Stream · SetSourceString · method · since 9.5.0.56`

```pascal
function SetSourceString(srcStr: WideString; charset: WideString): Integer;
```

Sets the stream's source to the contents of `srcStr`. The `charset` indicates the character encoding to be used for the byte representation of the `srcStr`.

Returns 1 for success, 0 for failure.

### Stream.ToDecimalStr

`Chilkat 11.7.0 · delphix · Stream · ToDecimalStr · method · since 9.5.0.56`

```pascal
function ToDecimalStr(propertyName: WideString): WideString;
```

Some programming languages do not support 64-bit integers. The following properties are implemented as 64-bit ints: Length, NumReceived, NumSent. The value of these properties can be retrieved in decimal string form by passing the property name in `propertyName`.

Returns a zero-length WideString on failure

### Stream.WriteBd

`Chilkat 11.7.0 · delphix · Stream · WriteBd · method · since 9.5.0.67`

```pascal
function WriteBd(binData: IChilkatBinData): Integer;
```

Writes the contents of `binData` to the stream.

Returns 1 for success, 0 for failure.

Async variant: `WriteBdAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.WriteByte

`Chilkat 11.7.0 · delphix · Stream · WriteByte · method · since 9.5.0.56`

```pascal
function WriteByte(byteVal: Integer): Integer;
```

Writes a single byte to the stream. The `byteVal` must have a value from 0 to 255.

Returns 1 for success, 0 for failure.

Async variant: `WriteByteAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.WriteBytes

`Chilkat 11.7.0 · delphix · Stream · WriteBytes · method · since 9.5.0.56`

```pascal
function WriteBytes(byteData: OleVariant): Integer;
```

Writes binary bytes to a stream.

Returns 1 for success, 0 for failure.

Async variant: `WriteBytesAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.WriteBytesENC

`Chilkat 11.7.0 · delphix · Stream · WriteBytesENC · method · since 9.5.0.56`

```pascal
function WriteBytesENC(byteData: WideString; encoding: WideString): Integer;
```

**Full documentation for this method (same in every language):** [Binary Encodings Supported by Chilkat](https://www.chilkatsoft.com/ai-docs/v/11.7.0/articles/binary_encodings.md)

Writes binary bytes to a stream. The byte data is passed in encoded string form, where the `encoding` can be `base64`, `hex`, or any of the supported binary encodings listed at the link below.

Returns 1 for success, 0 for failure.

Async variant: `WriteBytesENCAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.WriteClose

`Chilkat 11.7.0 · delphix · Stream · WriteClose · method · since 9.5.0.56`

```pascal
function WriteClose(): Integer;
```

Indicates that no more data will be written to the stream.

Returns 1 for success, 0 for failure.

### Stream.WriteSb

`Chilkat 11.7.0 · delphix · Stream · WriteSb · method · since 9.5.0.67`

```pascal
function WriteSb(sb: IChilkatStringBuilder): Integer;
```

Writes the contents of `sb` to the stream. The actual bytes written are the byte representation of the string as indicated by the StringCharset property. For example, to write utf-8 bytes, first set StringCharset equal to `utf-8` and then call WriteSb.

Returns 1 for success, 0 for failure.

Async variant: `WriteSbAsync` — same arguments, returns a `Task` (see Async variants below).

### Stream.WriteString

`Chilkat 11.7.0 · delphix · Stream · WriteString · method · since 9.5.0.56`

```pascal
function WriteString(str: WideString): Integer;
```

Writes a string to a stream. The actual bytes written are the byte representation of the string as indicated by the StringCharset property. For example, to write utf-8 bytes, first set StringCharset equal to `utf-8` and then call WriteString.

Returns 1 for success, 0 for failure.

Async variant: `WriteStringAsync` — same arguments, returns a `Task` (see Async variants below).

## Events and callbacks

### Stream.AbortCheck (event)

`Chilkat 11.7.0 · delphix · Stream · AbortCheck · event`

```pascal
procedure AbortCheck(ASender: TObject;  out abort: Integer);
```

Enables a method call to be aborted by triggering the AbortCheck event at intervals defined by the `HeartbeatMs` property. If HeartbeatMs is set to its default value of 0, no events will occur. For instance, set HeartbeatMs to 200 to trigger 5 AbortCheck events per second.

**Delphi ActiveX event callback implementation:**

To handle this event, implement a procedure with the signature shown below and assign it to the object's AbortCheck event. If you dropped the component onto a form, double-clicking the event in the Object Inspector creates the empty procedure for you.

```pascal
procedure TForm1.streamAbortCheck(ASender: TObject;  out abort: Integer);
begin
    // Application code goes here...
end;


procedure TForm1.Button1Click(Sender: TObject);
var
  stream: TChilkatStream;

begin
  stream := TChilkatStream.Create(Self);
  stream.OnAbortCheck := streamAbortCheck;
  // ...
```

### Stream.PercentDone (event)

`Chilkat 11.7.0 · delphix · Stream · PercentDone · event`

```pascal
procedure PercentDone(ASender: TObject;  pctDone: Integer; out abort: Integer);
```

This provides the percentage completion for any method involving network communications or time-consuming processing, assuming the progress can be measured as a percentage. This event is triggered only when it's possible and logical to express the operation's progress as a percentage. The `pctDone` argument will range from 1 to 100. For methods that finish quickly, the number of PercentDone callbacks may vary, but the final callback will have `pctDone` equal to 100. For longer operations, callbacks will not exceed one per percentage point (e.g., 1, 2, 3, ..., 98, 99, 100).

The PercentDone callback also acts as an `AbortCheck` event. For fast methods where PercentDone fires, an AbortCheck event may not trigger since the PercentDone callback already provides an opportunity to abort. For longer operations, where time between PercentDone callbacks is extended, AbortCheck callbacks enable more responsive operation termination.

To abort the operation, set the `abort` output argument to `1`. This will cause the method to terminate and return a failure status or corresponding failure value.

**Delphi ActiveX event callback implementation:**

To handle this event, implement a procedure with the signature shown below and assign it to the object's PercentDone event. If you dropped the component onto a form, double-clicking the event in the Object Inspector creates the empty procedure for you.

```pascal
procedure TForm1.streamPercentDone(ASender: TObject;  pctDone: Integer; out abort: Integer);
begin
    // Application code goes here...
end;


procedure TForm1.Button1Click(Sender: TObject);
var
  stream: TChilkatStream;

begin
  stream := TChilkatStream.Create(Self);
  stream.OnPercentDone := streamPercentDone;
  // ...
```

### Stream.ProgressInfo (event)

`Chilkat 11.7.0 · delphix · Stream · ProgressInfo · event`

```pascal
procedure ProgressInfo(ASender: TObject;  const name: WideString; const value: WideString);
```

This event callback provides `tag name`/value pairs that detail what occurs during a method call. To discover existing tag names, create code to handle the event, emit the pairs, and review them. Most tag names are self-explanatory.

Note: Some Chilkat methods don't fire any ProgressInfo events.

**Delphi ActiveX event callback implementation:**

To handle this event, implement a procedure with the signature shown below and assign it to the object's ProgressInfo event. If you dropped the component onto a form, double-clicking the event in the Object Inspector creates the empty procedure for you.

```pascal
procedure TForm1.streamProgressInfo(ASender: TObject;  const name: WideString; const value: WideString);
begin
    // Application code goes here...
end;


procedure TForm1.Button1Click(Sender: TObject);
var
  stream: TChilkatStream;

begin
  stream := TChilkatStream.Create(Self);
  stream.OnProgressInfo := streamProgressInfo;
  // ...
```

### Stream.TaskCompleted (event)

`Chilkat 11.7.0 · delphix · Stream · TaskCompleted · event`

```pascal
procedure TaskCompleted(ASender: TObject;  const task: IChilkatTask);
```

Called from the background thread when an asynchronous task completes.

**Delphi ActiveX event callback implementation:**

To handle this event, implement a procedure with the signature shown below and assign it to the object's TaskCompleted event. If you dropped the component onto a form, double-clicking the event in the Object Inspector creates the empty procedure for you.

```pascal
procedure TForm1.streamTaskCompleted(ASender: TObject;  const task: IChilkatTask);
begin
    // Application code goes here...
end;


procedure TForm1.Button1Click(Sender: TObject);
var
  stream: TChilkatStream;

begin
  stream := TChilkatStream.Create(Self);
  stream.OnTaskCompleted := streamTaskCompleted;
  // ...
```

## Async variants

Each returns a `Task` instead of the result and takes the same arguments as the synchronous method; run the task, wait for `Finished`, then read the result from the task. No new Async methods are added from 11.7.0 on.

```pascal
function ReadBdAsync(binData: IChilkatBinData): IChilkatTask;
function ReadBytesAsync(): IChilkatTask;
function ReadBytesENCAsync(encoding: WideString): IChilkatTask;
function ReadNBytesAsync(numBytes: Integer): IChilkatTask;
function ReadNBytesENCAsync(numBytes: Integer; encoding: WideString): IChilkatTask;
function ReadSbAsync(sb: IChilkatStringBuilder): IChilkatTask;
function ReadStringAsync(): IChilkatTask;
function ReadToCRLFAsync(): IChilkatTask;
function ReadUntilMatchAsync(matchStr: WideString): IChilkatTask;
function WriteBdAsync(binData: IChilkatBinData): IChilkatTask;
function WriteByteAsync(byteVal: Integer): IChilkatTask;
function WriteBytesAsync(byteData: OleVariant): IChilkatTask;
function WriteBytesENCAsync(byteData: WideString; encoding: WideString): IChilkatTask;
function WriteSbAsync(sb: IChilkatStringBuilder): IChilkatTask;
function WriteStringAsync(str: WideString): IChilkatTask;
```

## Related classes

[`BinData`](https://www.chilkatsoft.com/ai-docs/v/11.7.0/delphix/classes/BinData.md), [`StringBuilder`](https://www.chilkatsoft.com/ai-docs/v/11.7.0/delphix/classes/StringBuilder.md), [`Task`](https://www.chilkatsoft.com/ai-docs/v/11.7.0/delphix/classes/Task.md)

