---
product: Chilkat
product_version: 11.7.0
language: powerbuilder
language_label: PowerBuilder
class: SCard
license: bundle
deprecated: false
reference_html: https://www.chilkatsoft.com/refdoc/powerbuilder_SCardRef.html
---
# Chilkat SCard — PowerBuilder — v11.7.0

> Chilkat 11.7.0 · language=powerbuilder · class=SCard
> Other versions: replace `11.7.0` in this URL. Other languages: `https://www.chilkatsoft.com/ai-docs/v/11.7.0/<lang>/classes/SCard.md`.
> Language-wide rules (install, unlock, error model, strings/bytes): `https://www.chilkatsoft.com/ai-docs/v/11.7.0/powerbuilder/guide.md`.

## Purpose

**Communicate directly with smart card readers and cards through PC/SC.**

`Chilkat.SCard` is the low-level PC/SC smart card interface for applications that need direct reader and card communication. It supports reader discovery, reader connection, card status checking, APDU transmission, reader-control commands, status-change monitoring, transactions, and diagnostic access to underlying PC/SC errors. Use this class when the application needs APDU-level control rather than a higher-level certificate, minidriver, or PKCS#11 abstraction.

**Reader discovery**

Enumerate available PC/SC smart card readers and identify the reader the application should use.

**Connect to cards**

Connect to a reader/card, check card presence and status, and manage the active PC/SC connection.

**Transmit APDUs**

Send APDU commands directly to the card and receive the raw response bytes and status words.

**Reader-control commands**

Issue lower-level reader control commands when supported by the reader driver and PC/SC environment.

**Status monitoring**

Monitor reader or card status changes so applications can detect card insertion, removal, or state changes.

**Transactions and diagnostics**

Use PC/SC transactions for coordinated card access and inspect detailed error information when reader or card operations fail.

**Common pattern:** Establish the PC/SC context, list readers, connect to the selected reader, check card status, transmit APDU commands, process the response bytes, and disconnect when finished. Use `Chilkat.SCard` for direct PC/SC reader and APDU-level work; use `Chilkat.ScMinidriver` for card-minidriver certificate and key-container operations, and `Chilkat.Pkcs11` for PKCS#11 token or HSM sessions.

For an extended overview, see [SCard Class Overview](https://www.chilkatsoft.com/scard_class_overview.asp).

## Object creation, unlocking and error handling

**Object Creation**

```powerbuilder
oleobject loo_SCard
integer li_rc

loo_SCard = create oleobject
li_rc = loo_SCard.ConnectToNewObject("Chilkat.SCard")
if li_rc < 0 then
    destroy loo_SCard
    MessageBox("Error","Connecting to COM object failed")
    return
end if

// ... use loo_SCard ...

destroy loo_SCard
```

PowerBuilder uses the Chilkat ActiveX through an `oleobject`: declare the variable, `create` it, connect it to the Chilkat class with `ConnectToNewObject`, and `destroy` it when finished. A negative return code from `ConnectToNewObject` means the ActiveX is not registered, or the registered ActiveX does not match the bitness (32-bit or 64-bit) of the PowerBuilder target.

Objects returned by methods (such as an `HttpResponse` or `JsonObject`) are also `oleobject` variables and must likewise be destroyed. A method that fails to return an object returns `null`; test with `IsNull()`. In the signatures on this page, the Chilkat class name identifies which object is expected or returned; the PowerBuilder variable type is always `oleobject`.

To bind to a specific major version of Chilkat, append the major version number to the ProgID, such as `ConnectToNewObject("Chilkat.SCard.11")` for Chilkat v11.\*.\*.

Members typed `blob` exchange binary data as a Variant byte array. The PowerBuilder examples instead use the `BinData`-based alternatives (methods ending in *Bd*), which keep binary data inside Chilkat objects.

Call `Global.UnlockBundle` once at the start of the program, before using this or any other Chilkat class. Any string unlocks a fully functional 30-day trial; a purchased unlock code is used in production. See `guide.md` for the exact code in PowerBuilder.

How failure is reported depends on the method's return type and is stated in the note under each method below. In every case the diagnostic text is in the `LastErrorText` property of the object whose method was called.

## Members common to every Chilkat class

Documented once per language in `common-members.md`; listed here so this page is self-contained.

| Property | Signature | Access | Meaning |
|---|---|---|---|
| `DebugLogFilePath` | `string DebugLogFilePath` | read/write | If set to a file path, this property logs the LastErrorText of each Chilkat method or property call to the specified file. |
| `LastBinaryResult` | `blob LastBinaryResult (read-only)` | read-only | This property is mainly used in SQL Server stored procedures to retrieve binary data from the last method call that returned binary data. |
| `LastErrorHtml` | `string LastErrorHtml (read-only)` | read-only | Provides HTML-formatted information about the last called method or property. |
| `LastErrorText` | `string LastErrorText (read-only)` | read-only | Provides plain text information about the last called method or property. |
| `LastErrorXml` | `string LastErrorXml (read-only)` | read-only | Provides XML-formatted information about the last called method or property. |
| `LastMethodSuccess` | `long LastMethodSuccess` | read/write | Indicates the success or failure of the most recent method call: `1` means success, `0` means failure. |
| `LastStringResult` | `string LastStringResult (read-only)` | read-only | In SQL Server stored procedures, this property holds the string return value of the most recent method call that returns a string. |
| `LastStringResultLen` | `long LastStringResultLen (read-only)` | read-only | The length, in characters, of the string contained in the LastStringResult property. |
| `VerboseLogging` | `long VerboseLogging` | read/write | If set to `1`, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. |
| `Version` | `string Version (read-only)` | read-only | Version of the component/library, such as "10.1.0" |

## Member index

| Member | Kind | Signature |
|---|---|---|
| `ActiveProtocol` | property, read-only | `string ActiveProtocol (read-only)` |
| `CardAtr` | property, read-only | `string CardAtr (read-only)` |
| `ConnectedReader` | property, read-only | `string ConnectedReader (read-only)` |
| `Context` | property, read-only | `string Context (read-only)` |
| `PcscLibPath` | property, read/write | `string PcscLibPath` |
| `ReaderStatus` | property, read-only | `string ReaderStatus (read-only)` |
| `ScardError` | property, read-only | `string ScardError (read-only)` |
| `BeginTransaction` | method | `long BeginTransaction()` |
| `CheckStatus` | method | `long CheckStatus()` |
| `Connect` | method | `long Connect(string reader, string shareMode, string preferredProtocol)` |
| `Disconnect` | method | `long Disconnect(string disposition)` |
| `EndTransaction` | method | `long EndTransaction(string disposition)` |
| `EstablishContext` | method | `long EstablishContext(string scope)` |
| `FindSmartcards` | method | `long FindSmartcards(ChilkatJsonObject json)` |
| `GetAttrib` | method | `long GetAttrib(string attr, ChilkatBinData bd)` |
| `GetAttribStr` | method | `string GetAttribStr(string attr)` |
| `GetAttribUint` | method | `long GetAttribUint(string attr)` |
| `GetStatusChange` | method | `long GetStatusChange(long maxWaitMs, ChilkatStringTable stReaderNames, ChilkatJsonObject json)` |
| `GetStatusChangeCancel` | method | `long GetStatusChangeCancel()` |
| `ListReaderGroups` | method | `long ListReaderGroups(ChilkatStringTable readerGroups)` |
| `ListReaders` | method | `long ListReaders(ChilkatStringTable st)` |
| `Reconnect` | method | `long Reconnect(string shareMode, string preferredProtocol, string action)` |
| `ReleaseContext` | method | `long ReleaseContext()` |
| `SendControl` | method | `long SendControl(long controlCode, ChilkatBinData bdSend, ChilkatBinData bdRecv)` |
| `SendControlHex` | method | `long SendControlHex(long controlCode, string sendData, ChilkatBinData bdRecv)` |
| `Transmit` | method | `long Transmit(string protocolName, ChilkatBinData bdSend, ChilkatBinData bdRecv, long maxRecvLen)` |
| `TransmitHex` | method | `long TransmitHex(string protocolName, string apduHex, ChilkatBinData bdRecv, long maxRecvLen)` |

## Properties

### SCard.ActiveProtocol

`Chilkat 11.7.0 · powerbuilder · SCard · ActiveProtocol · property · read-only · since 9.50.87`

```powerbuilder
string ActiveProtocol (read-only)
```

The name of the active protocol if connected smart card reader, or an empty string if not connected. Possible values are `T0`, `T1`, `raw`, `undefined`, or if not connected to a reader.

### SCard.CardAtr

`Chilkat 11.7.0 · powerbuilder · SCard · CardAtr · property · read-only · since 9.50.87`

```powerbuilder
string CardAtr (read-only)
```

This is the Current ATR of a card in the connected reader.

### SCard.ConnectedReader

`Chilkat 11.7.0 · powerbuilder · SCard · ConnectedReader · property · read-only · since 9.50.87`

```powerbuilder
string ConnectedReader (read-only)
```

The name of the currently connected smart card reader, or an empty string if not connected.

### SCard.Context

`Chilkat 11.7.0 · powerbuilder · SCard · Context · property · read-only · since 9.50.87`

```powerbuilder
string Context (read-only)
```

Contains the string `user` or `system` if this object has established a context (by calling EstablishContext). Contains the empty string if no context is established.

### SCard.PcscLibPath

`Chilkat 11.7.0 · powerbuilder · SCard · PcscLibPath · property · read/write · since 9.50.87`

```powerbuilder
string PcscLibPath
```

For Linux systems only. Specifies the full path of the libpcsclite.so shared lib. This property should only be used if the libpcsclite.so is in a non-standard location or if Chilkat cannot automatically located it.

### SCard.ReaderStatus

`Chilkat 11.7.0 · powerbuilder · SCard · ReaderStatus · property · read-only · since 9.50.87`

```powerbuilder
string ReaderStatus (read-only)
```

The current status of the connected reader. Possible values are:

- `absent` - There is no card in the reader.
- `present` - There is a card in the reader, but it has not been moved into position for use.
- `swallowed` - There is a card in the reader in position for use. The card is not powered.
- `powered` - Power is being provided to the card, but the reader driver is unaware of the mode of the card.
- `negotiable` - The card has been reset and is awaiting PTS negotiation.
- `specific` - The card has been reset and specific communication protocols have been established.

### SCard.ScardError

`Chilkat 11.7.0 · powerbuilder · SCard · ScardError · property · read-only · since 9.50.87`

```powerbuilder
string ScardError (read-only)
```

The last error returned by an underlying PC/SC function. Can be one of the following:

- `SCARD_W_REMOVED_CARD` - The smart card has been removed, so that further communication is not possible.
- `SCARD_W_RESET_CARD` - The smart card has been reset, so any shared state information is invalid.
...

## Methods

### SCard.BeginTransaction

`Chilkat 11.7.0 · powerbuilder · SCard · BeginTransaction · method · since 9.50.87`

```powerbuilder
long BeginTransaction()
```

Establishes a temporary exclusive access mode for doing a series of commands in a transaction.

Returns 1 for success, 0 for failure.

### SCard.CheckStatus

`Chilkat 11.7.0 · powerbuilder · SCard · CheckStatus · method · since 9.50.87`

```powerbuilder
long CheckStatus()
```

Check the current status of the currently connected reader. Calling this method updates the ReaderStatus, ActiveProtocol, and CardAtr properties. If this method returns `0`, none of the properties are updated.

Returns 1 for success, 0 for failure.

### SCard.Connect

`Chilkat 11.7.0 · powerbuilder · SCard · Connect · method · since 9.50.87`

```powerbuilder
long Connect(string reader, string shareMode, string preferredProtocol)
```

Establish a connection to a reader. The `reader` is the name of a reader returned from ListReaders. The `shareMode` can be `shared`, `exclusive`, or `direct`. The `preferredProtocol` can be `0` (valid only if the shareMode = `direct`), `T0`, `T1`, `raw`, or `no_preference`. (No preference is effectively T0 or T1.)

If successful, the state of this object instance is that it's connected to the reader.

Returns 1 for success, 0 for failure.

### SCard.Disconnect

`Chilkat 11.7.0 · powerbuilder · SCard · Disconnect · method · since 9.50.87`

```powerbuilder
long Disconnect(string disposition)
```

Terminates a connection with a reader. The `disposition` can be one of the following values:

- `leave`: Do nothing.
- `reset`: Reset the card (warm reset).
- `unpower`: Power down the card (cold reset).
- `eject`: Eject the card.

Returns 1 for success, 0 for failure.

### SCard.EndTransaction

`Chilkat 11.7.0 · powerbuilder · SCard · EndTransaction · method · since 9.50.87`

```powerbuilder
long EndTransaction(string disposition)
```

Ends a previously begun transaction. The `disposition` is the action to be taken on the reader, and can be `leave` which is to do nothing, `reset`, `unpower`, or `eject`.

Returns 1 for success, 0 for failure.

### SCard.EstablishContext

`Chilkat 11.7.0 · powerbuilder · SCard · EstablishContext · method · since 9.5.0.87`

```powerbuilder
long EstablishContext(string scope)
```

Creates an Application Context to the PC/SC Resource Manager. This must be the first WinSCard function called in a PC/SC application. The `scope` can be `user` or `system`. After calling, this object will have context and all other methods will use the established context. The `Context` property will hold the value `user` or `system` if context was established, or will be empty if no context was established.

Returns 1 for success, 0 for failure.

### SCard.FindSmartcards

`Chilkat 11.7.0 · powerbuilder · SCard · FindSmartcards · method · since 9.50.87`

```powerbuilder
long FindSmartcards(ChilkatJsonObject json)
```

Returns JSON containing information about the smartcards currently inserted into readers.

Returns 1 for success, 0 for failure.

### SCard.GetAttrib

`Chilkat 11.7.0 · powerbuilder · SCard · GetAttrib · method · since 9.50.87`

```powerbuilder
long GetAttrib(string attr, ChilkatBinData bd)
```

Get an attribute from the IFD Handler (reader driver).

The `attr` can be one of the following:

- `ASYNC_PROTOCOL_TYPES`
- `ATR_STRING`
- `CHANNEL_ID`
- `CHARACTERISTICS`
- `CURRENT_BWT`
- `CURRENT_CLK`
- `CURRENT_CWT`
- `CURRENT_D`
- `CURRENT_EBC_ENCODING`
- `CURRENT_F`
- `CURRENT_IFSC`
- `CURRENT_IFSD`
- `CURRENT_IO_STATE`
- `CURRENT_N`
- `CURRENT_PROTOCOL_TYPE`
- `CURRENT_W`
- `DEFAULT_CLK`
- `DEFAULT_DATA_RATE`
- `DEVICE_FRIENDLY_NAME`
- `DEVICE_IN_USE`
- `DEVICE_SYSTEM_NAME`
- `DEVICE_UNIT`
- `ESC_AUTHREQUEST`
- `ESC_CANCEL`
- `ESC_RESET`
- `EXTENDED_BWT`
- `ICC_INTERFACE_STATUS`
- `ICC_PRESENCE`
- `ICC_TYPE_PER_ATR`
- `MAX_CLK`
- `MAX_DATA_RATE`
- `MAX_IFSD`
- `MAXINPUT`
- `POWER_MGMT_SUPPORT`
- `SUPRESS_T1_IFS_REQUEST`
- `SYNC_PROTOCOL_TYPES`
- `USER_AUTH_INPUT_DEVICE`
- `USER_TO_CARD_AUTH_DEVICE`
- `VENDOR_IFD_SERIAL_NO`
- `VENDOR_IFD_TYPE`
- `VENDOR_IFD_VERSION`
- `VENDOR_NAME`

The attribute data is returned in `bd`.

Returns 1 for success, 0 for failure.

### SCard.GetAttribStr

`Chilkat 11.7.0 · powerbuilder · SCard · GetAttribStr · method · since 9.50.87`

```powerbuilder
string GetAttribStr(string attr)
```

Get a string typed attribute from the IFD Handler (reader driver).

The `attr` can be one of the following, but should be limited to the particular attributes that return string values.

- `ASYNC_PROTOCOL_TYPES`
- `ATR_STRING`
- `CHANNEL_ID`
- `CHARACTERISTICS`
- `CURRENT_BWT`
- `CURRENT_CLK`
- `CURRENT_CWT`
- `CURRENT_D`
- `CURRENT_EBC_ENCODING`
- `CURRENT_F`
- `CURRENT_IFSC`
- `CURRENT_IFSD`
- `CURRENT_IO_STATE`
- `CURRENT_N`
- `CURRENT_PROTOCOL_TYPE`
- `CURRENT_W`
- `DEFAULT_CLK`
- `DEFAULT_DATA_RATE`
- `DEVICE_FRIENDLY_NAME`
- `DEVICE_IN_USE`
- `DEVICE_SYSTEM_NAME`
- `DEVICE_UNIT`
- `ESC_AUTHREQUEST`
- `ESC_CANCEL`
- `ESC_RESET`
- `EXTENDED_BWT`
- `ICC_INTERFACE_STATUS`
- `ICC_PRESENCE`
- `ICC_TYPE_PER_ATR`
- `MAX_CLK`
- `MAX_DATA_RATE`
- `MAX_IFSD`
- `MAXINPUT`
- `POWER_MGMT_SUPPORT`
- `SUPRESS_T1_IFS_REQUEST`
- `SYNC_PROTOCOL_TYPES`
- `USER_AUTH_INPUT_DEVICE`
- `USER_TO_CARD_AUTH_DEVICE`
- `VENDOR_IFD_SERIAL_NO`
- `VENDOR_IFD_TYPE`
- `VENDOR_IFD_VERSION`
- `VENDOR_NAME`

Returns `null` on failure

### SCard.GetAttribUint

`Chilkat 11.7.0 · powerbuilder · SCard · GetAttribUint · method · since 9.50.87`

```powerbuilder
long GetAttribUint(string attr)
```

Get an unsigned integer typed attribute from the IFD Handler (reader driver).

The `attr` can be one of the following, but should be limited to the particular attributes that return unsigned integer values.

- `ASYNC_PROTOCOL_TYPES`
- `ATR_STRING`
- `CHANNEL_ID`
- `CHARACTERISTICS`
- `CURRENT_BWT`
- `CURRENT_CLK`
- `CURRENT_CWT`
- `CURRENT_D`
- `CURRENT_EBC_ENCODING`
- `CURRENT_F`
- `CURRENT_IFSC`
- `CURRENT_IFSD`
- `CURRENT_IO_STATE`
- `CURRENT_N`
- `CURRENT_PROTOCOL_TYPE`
- `CURRENT_W`
- `DEFAULT_CLK`
- `DEFAULT_DATA_RATE`
- `DEVICE_FRIENDLY_NAME`
- `DEVICE_IN_USE`
- `DEVICE_SYSTEM_NAME`
- `DEVICE_UNIT`
- `ESC_AUTHREQUEST`
- `ESC_CANCEL`
- `ESC_RESET`
- `EXTENDED_BWT`
- `ICC_INTERFACE_STATUS`
- `ICC_PRESENCE`
- `ICC_TYPE_PER_ATR`
- `MAX_CLK`
- `MAX_DATA_RATE`
- `MAX_IFSD`
- `MAXINPUT`
- `POWER_MGMT_SUPPORT`
- `SUPRESS_T1_IFS_REQUEST`
- `SYNC_PROTOCOL_TYPES`
- `USER_AUTH_INPUT_DEVICE`
- `USER_TO_CARD_AUTH_DEVICE`
- `VENDOR_IFD_SERIAL_NO`
- `VENDOR_IFD_TYPE`
- `VENDOR_IFD_VERSION`
- `VENDOR_NAME`

Returns 0xFFFFFFFF on failure.

### SCard.GetStatusChange

`Chilkat 11.7.0 · powerbuilder · SCard · GetStatusChange · method · since 9.50.87`

```powerbuilder
long GetStatusChange(long maxWaitMs, ChilkatStringTable stReaderNames, ChilkatJsonObject json)
```

Blocks execution until the current availability of the cards in a specific set of readers changes.

This function receives a list of reader names in `stReaderNames`. It then blocks waiting for a change in state to occur for a maximum blocking time of `maxWaitMs` (in milliseconds) or forever if 0 is used.

Information about the current reader states and which reader(s) changed is returned in `json`. See the example below for more information.

To wait for a reader event (reader added or removed) you may use the special reader name `\\?PnP?\Notification`.

To cancel the ongoing call, call Cancel().

The `stReaderNames` contains the reader names to check. The `json` is empty on input, and if the call returns success contains information about the state (after the event change) of each reader.

Returns 1 for success, 0 for failure.

Async variant: `GetStatusChangeAsync` — same arguments, returns a `Task` (see Async variants below).

### SCard.GetStatusChangeCancel

`Chilkat 11.7.0 · powerbuilder · SCard · GetStatusChangeCancel · method · since 9.50.87`

```powerbuilder
long GetStatusChangeCancel()
```

Cancels an ongoing GetStatusChange method call. This would be called from a separate thread in your application if GetStatusChange was called synchronously.

Returns 1 for success, 0 for failure.

### SCard.ListReaderGroups

`Chilkat 11.7.0 · powerbuilder · SCard · ListReaderGroups · method · since 9.50.87`

```powerbuilder
long ListReaderGroups(ChilkatStringTable readerGroups)
```

Returns a list of currently available reader groups on the system. The reader groups are returned in `readerGroups`.

Returns 1 for success, 0 for failure.

### SCard.ListReaders

`Chilkat 11.7.0 · powerbuilder · SCard · ListReaders · method · since 9.50.87`

```powerbuilder
long ListReaders(ChilkatStringTable st)
```

Returns a list of currently available readers on the system.

Returns 1 for success, 0 for failure.

### SCard.Reconnect

`Chilkat 11.7.0 · powerbuilder · SCard · Reconnect · method · since 9.50.87`

```powerbuilder
long Reconnect(string shareMode, string preferredProtocol, string action)
```

Reestablishes a connection to a reader that was previously connected to using Connect().

In a multi application environment it is possible for an application to reset the card in shared mode. When this occurs any other application trying to access certain commands will be returned the value SCARD_W_RESET_CARD. When this occurs Reconnect() must be called in order to acknowledge that the card was reset and allow it to change its state accordingly.

The `shareMode` can be `shared`, `exclusive`, or `direct`. The `preferredProtocol` can be `0` (valid only if the shareMode = `direct`), `T0`, `T1`, `raw`, or `no_preference`. (No preference is effectively T0 or T1.) The `action` is the desired action taken on the card/reader. It can be `leave`, `reset`, `unpower`, or `eject`.

If successful, the state of this object instance is that it's connected to the reader.

Returns 1 for success, 0 for failure.

### SCard.ReleaseContext

`Chilkat 11.7.0 · powerbuilder · SCard · ReleaseContext · method · since 9.50.87`

```powerbuilder
long ReleaseContext()
```

Destroys a communication context to the PC/SC Resource Manager. This must be the last function called in a PC/SC application.

Returns 1 for success, 0 for failure.

### SCard.SendControl

`Chilkat 11.7.0 · powerbuilder · SCard · SendControl · method · since 9.50.87`

```powerbuilder
long SendControl(long controlCode, ChilkatBinData bdSend, ChilkatBinData bdRecv)
```

Sends a command directly to the IFD Handler (reader driver) to be processed by the reader.

This is useful for creating client side reader drivers for functions like PIN pads, biometrics, or other extensions to the normal smart card reader that are not normally handled by PC/SC.

The command data is sent in `bdSend`. The response is written to `bdRecv`.

Returns 1 for success, 0 for failure.

### SCard.SendControlHex

`Chilkat 11.7.0 · powerbuilder · SCard · SendControlHex · method · since 9.50.87`

```powerbuilder
long SendControlHex(long controlCode, string sendData, ChilkatBinData bdRecv)
```

Sends a command directly to the IFD Handler (reader driver) to be processed by the reader.

This is useful for creating client side reader drivers for functions like PIN pads, biometrics, or other extensions to the normal smart card reader that are not normally handled by PC/SC.

The command data is provided as a hex string in `sendData`. The response is written to `bdRecv`.

Returns 1 for success, 0 for failure.

### SCard.Transmit

`Chilkat 11.7.0 · powerbuilder · SCard · Transmit · method · since 9.50.87`

```powerbuilder
long Transmit(string protocolName, ChilkatBinData bdSend, ChilkatBinData bdRecv, long maxRecvLen)
```

Sends an APDU to the smart card contained in the currently connected reader. The `protocolName` can be `T0`, `T1`, or `raw`. The APDU to be sent is contained in `bdSend`. The response from the card is contained in `bdRecv`. The `maxRecvLen` is the maximum response size (in bytes) willing to be accepted.

Returns 1 for success, 0 for failure.

### SCard.TransmitHex

`Chilkat 11.7.0 · powerbuilder · SCard · TransmitHex · method · since 9.50.87`

```powerbuilder
long TransmitHex(string protocolName, string apduHex, ChilkatBinData bdRecv, long maxRecvLen)
```

Sends an APDU to the smart card contained in the currently connected reader. The `protocolName` can be `T0`, `T1`, or `raw`. The APDU (in hexadecimal) to be sent is passed in `apduHex`. The response from the card is contained in `bdRecv`. The `maxRecvLen` is the maximum response size (in bytes) willing to be accepted.

Returns 1 for success, 0 for failure.

## Events and callbacks

This binding has no event callbacks. For progress, percent-done or cancellation use the `*Async` variant of a method and poll the returned `Task` (`PercentDone`, `Finished`, `Cancel`).

## Async variants

Each returns a `Task` instead of the result and takes the same arguments as the synchronous method; run the task, wait for `Finished`, then read the result from the task. No new Async methods are added from 11.7.0 on.

```powerbuilder
ChilkatTask GetStatusChangeAsync(long maxWaitMs, ChilkatStringTable stReaderNames, ChilkatJsonObject json)
```

## Related classes

[`BinData`](https://www.chilkatsoft.com/ai-docs/v/11.7.0/powerbuilder/classes/BinData.md), [`JsonObject`](https://www.chilkatsoft.com/ai-docs/v/11.7.0/powerbuilder/classes/JsonObject.md), [`StringTable`](https://www.chilkatsoft.com/ai-docs/v/11.7.0/powerbuilder/classes/StringTable.md)

