CkoStream Objective-C Reference Documentation

CkoStream

Provides a generic class for streaming from a source to a sink. Streams can be connected together where the sink of one feeds to the source of another.

Note: This class was added in Chilkat v9.5.0.56. Initially it will seem somewhat useless, but over time, streaming functionality will be added to existing Chilkat classes and will be prevalent in new Chilkat classes.

Properties

@property (nonatomic) BOOL AbortCurrent;

Introduced in version 9.5.0.58

When set to YES, causes the currently running method to abort. Methods that always finish quickly (i.e.have no length file operations or network communications) are not affected. If no method is running, then this property is automatically reset to NO when the next method is called. When the abort occurs, this property is reset to NO. Both synchronous and asynchronous method calls can be aborted. (A synchronous method call could be aborted by setting this property from a separate thread.)

@property (nonatomic, readonly) BOOL CanRead;

Introduced in version 9.5.0.56

YES if the stream supports reading. Otherwise NO.

Note: A stream that supports reading, which has already reached the end-of-stream, will still have a CanRead value of YES. This property indicates the stream's inherent ability, and not whether or not the stream can be read at a particular moment in time.

@property (nonatomic, readonly) BOOL CanWrite;

Introduced in version 9.5.0.56

YES if the stream supports writing. Otherwise NO.

Note: A stream that supports writing, which has already been closed for write, will still have a CanWrite value of YES. This property indicates the stream's inherent ability, and not whether or not the stream can be written at a particular moment in time.

@property (nonatomic, readonly) BOOL DataAvailable;

Introduced in version 9.5.0.56

YES if it is known for sure that data is ready and waiting to be read. NO if it is not known for sure (it may be that data is immediately available, but reading the stream with a ReadTimeoutMs of 0, which is to poll the stream, is the way to find out).

@property (nonatomic, copy) NSString *DebugLogFilePath;

If set to a file path, causes each Chilkat method or property call to automatically append it's LastErrorText to the specified log file. The information is appended such that if a hang or crash occurs, it is possible to see the context in which the problem occurred, as well as a history of all Chilkat calls up to the point of the problem. The VerboseLogging property can be set to provide more detailed information.

This property is typically used for debugging the rare cases where a Chilkat method call hangs or generates an exception that halts program execution (i.e. crashes). A hang or crash should generally never happen. The typical causes of a hang are:

  1. a timeout related property was set to 0 to explicitly indicate that an infinite timeout is desired,
  2. the hang is actually a hang within an event callback (i.e. it is a hang within the application code), or
  3. there is an internal problem (bug) in the Chilkat code that causes the hang.

@property (nonatomic, copy) NSNumber *DefaultChunkSize;

Introduced in version 9.5.0.56

The default internal chunk size for reading or writing. The default value is 65536. If this property is set to 0, it will cause the default chunk size (65536) to be used. Note: The chunk size can have significant performance impact. If performance is an issue, be sure to experiment with different chunk sizes.

@property (nonatomic, readonly) BOOL EndOfStream;

Introduced in version 9.5.0.56

YES if the end-of-stream has already been reached. When the stream has already ended, all calls to Read* methods will return NO with the ReadFailReason set to 3 (already at end-of-stream).

@property (nonatomic, readonly) BOOL IsWriteClosed;

Introduced in version 9.5.0.56

YES if the stream is closed for writing. Once closed, no more data may be written to the stream.

@property (nonatomic, readonly, copy) NSString *LastErrorHtml;

Provides information in HTML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

@property (nonatomic, readonly, copy) NSString *LastErrorText;

Provides information in plain-text format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

Concept of LastErrorText

LastErrorText Standard Information

@property (nonatomic, readonly, copy) NSString *LastErrorXml;

Provides information in XML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

@property (nonatomic) BOOL LastMethodSuccess;

Introduced in version 9.5.0.52

Indicate whether the last method call succeeded or failed. A value of YES indicates success, a value of NO indicates failure. This property is automatically set for method calls. It is not modified by property accesses. The property is automatically set to indicate success for the following types of method calls:

  • Any method that returns a string.
  • Any method returning a Chilkat object, binary bytes, or a date/time.
  • Any method returning a standard boolean status value where success = YES and failure = NO.
  • Any method returning an integer where failure is defined by a return value less than zero.

Note: Methods that do not fit the above requirements will always set this property equal to YES. For example, a method that returns no value (such as a "void" in C++) will technically always succeed.

@property (nonatomic, copy) NSNumber *Length;

Introduced in version 9.5.0.56

The length (in bytes) of the stream's source. If unknown, then this property will have a value of -1. This property may be set by the application if it knows in advance the length of the stream.

@property (nonatomic, copy) NSNumber *Length32;

Introduced in version 9.5.0.58

The length (in bytes) of the stream's source. If unknown, then this property will have a value of -1. This property may be set by the application if it knows in advance the length of the stream.

Setting this property also sets the Length property (which is a 64-bit integer).

@property (nonatomic, readonly, copy) NSNumber *NumReceived;

Introduced in version 9.5.0.56

The number of bytes received by the stream.

@property (nonatomic, readonly, copy) NSNumber *NumSent;

Introduced in version 9.5.0.56

The number of bytes sent by the stream.

@property (nonatomic, readonly, copy) NSNumber *ReadFailReason;

Introduced in version 9.5.0.56

This property is automatically set when a Read* method is called. It indicates the reason for failure. Possible values are:

  1. No failure (success)
  2. Timeout, or no data is immediately available for a polling read.
  3. Aborted by an application callback.
  4. Already at end-of-stream.
  5. Fatal stream error.
  6. Out-of-memory error (this is very unlikely).

@property (nonatomic, copy) NSNumber *ReadTimeoutMs;

Introduced in version 9.5.0.56

The maximum number of seconds to wait while reading. The default value is 30 seconds (i.e. 30000ms). A value of 0 indicates a poll. (A polling read is to return with a timeout if no data is immediately available.)

Important: For most Chilkat timeout related properties, a value of 0 indicates an infinite timeout. For this property, a value of 0 indicates a poll. If setting a timeout related property (or method argument) to zero, be sure to understand if 0 means "wait forever" or "poll".

The timeout value is not a total timeout. It is the maximum time to wait while no additional data is forthcoming.

@property (nonatomic, copy) NSString *SinkFile;

Introduced in version 9.5.0.56

Sets the sink to the path of a file. The file does not need to exist at the time of setting this property. The sink file will be automatically opened on demand, when the stream is first written.

Note: This property takes priority over other potential sinks. Make sure this property is set to an empty string if the stream's sink is to be something else.

Copy a File using a Stream

@property (nonatomic, copy) NSString *SourceFile;

Introduced in version 9.5.0.56

Sets the source to the path of a file. The file does not need to exist at the time of setting this property. The source file will be automatically opened on demand, when the stream is first read.

Note: This property takes priority over other potential sources. Make sure this property is set to an empty string if the stream's source is to be something else.

Copy a File using a Stream

@property (nonatomic, copy) NSNumber *SourceFilePart;

Introduced in version 9.5.0.59

If the source is a file, then this property can be used to stream one part of the file. The SourceFilePartSize property defines the size (in bytes) of each part. The SourceFilePart and SourceFilePartSize have default values of 0, which means the entire SourceFile is streamed.

This property is a 0-based index. For example, if the SourceFilePartSize is 1000, then part 0 is for bytes 0 to 999, part 1 is for bytes 1000 to 1999, etc.

S3 Upload the Parts for a Multipart Upload

@property (nonatomic, copy) NSNumber *SourceFilePartSize;

Introduced in version 9.5.0.59

If the source is a file, then this property, in conjunction with the SourceFilePart property, can be used to stream a single part of the file. This property defines the size (in bytes) of each part. The SourceFilePart and SourceFilePartSize have default values of 0, which means that by default, the entire SourceFile is streamed.

S3 Upload the Parts for a Multipart Upload

@property (nonatomic) BOOL StringBom;

Introduced in version 9.5.0.56

If YES, then include the BOM when creating a string source via SetSourceString where the charset is utf-8, utf-16, etc. (The term "BOM" stands for Byte Order Mark, also known as the preamble.) Also, if YES, then include the BOM when writing a string via the WriteString method. The default value of this property is NO.

@property (nonatomic, copy) NSString *StringCharset;

Introduced in version 9.5.0.56

Indicates the expected character encoding, such as utf-8, windows-1256, utf-16, etc. for methods that read text such as: ReadString, ReadToCRLF, ReadUntilMatch. Also controls the character encoding when writing strings with the WriteString method. The supported charsets are indicated at the link below.

The default value is "utf-8".

Charsets Supported by Chilkat

@property (nonatomic) BOOL VerboseLogging;

If set to YES, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. The default value is NO. Verbose logging should only be used for debugging. The potentially large quantity of logged information may adversely affect peformance.

@property (nonatomic, readonly, copy) NSString *Version;

Version of the component/library, such as "9.5.0.63"

@property (nonatomic, readonly, copy) NSNumber *WriteFailReason;

Introduced in version 9.5.0.56

This property is automatically set when a Write* method is called. It indicates the reason for failure. Possible values are:

  1. No failure (success)
  2. Timeout, or unable to immediately write when the WriteTimeoutMs is 0.
  3. Aborted by an application callback.
  4. The stream has already ended.
  5. Fatal stream error.
  6. Out-of-memory error (this is very unlikely).

@property (nonatomic, copy) NSNumber *WriteTimeoutMs;

Introduced in version 9.5.0.56

The maximum number of seconds to wait while writing. The default value is 30 seconds (i.e. 30000ms). A value of 0 indicates to return immediately if it is not possible to write to the sink immediately.

Methods

- (BOOL)ReadBd:(CkoBinData *)binData;

Introduced in version 9.5.0.67

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The incoming data is appended to binData.

Returns YES for success, NO for failure.

Unzip Binary File to Stream

- (CkoTask *)ReadBdAsync:(CkoBinData *)binData;

Introduced in version 9.5.0.67

Creates an asynchronous task to call the ReadBd method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

FTP Download Binary File to a Stream

- (NSData *)ReadBytes;

Introduced in version 9.5.0.56

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive.

Returns nil on failure

- (CkoTask *)ReadBytesAsync;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadBytes method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (NSString *)ReadBytesENC:(NSString *)encoding;

Introduced in version 9.5.0.56

The same as ReadBytes, except returns the received bytes in encoded string form. The encoding argument indicates the encoding, which can be "base64", "hex", or any of the multitude of encodings indicated in the link below.

Returns nil on failure

Binary Encodings Supported by Chilkat

- (CkoTask *)ReadBytesENCAsync:(NSString *)encoding;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadBytesENC method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (NSData *)ReadNBytes:(NSNumber *)numBytes;

Introduced in version 9.5.0.56

Reads exactly numBytes bytes from the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive.

Returns nil on failure

- (CkoTask *)ReadNBytesAsync:(NSNumber *)numBytes;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadNBytes method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (NSString *)ReadNBytesENC:(NSNumber *)numBytes
    encoding:(NSString *)encoding;

Introduced in version 9.5.0.56

The same as ReadNBytes, except returns the received bytes in encoded string form. The encoding argument indicates the encoding, which can be "base64", "hex", or any of the multitude of encodings indicated in the link below.

Returns nil on failure

Binary Encodings Supported by Chilkat

- (CkoTask *)ReadNBytesENCAsync:(NSNumber *)numBytes
    encoding:(NSString *)encoding;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadNBytesENC method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (BOOL)ReadSb:(CkoStringBuilder *)sb;

Introduced in version 9.5.0.67

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is appended to sb. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to "utf-8" prior to calling ReadSb.

Returns YES for success, NO for failure.

- (CkoTask *)ReadSbAsync:(CkoStringBuilder *)sb;

Introduced in version 9.5.0.67

Creates an asynchronous task to call the ReadSb method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

Unzip One File to a Stream

- (NSString *)ReadString;

Introduced in version 9.5.0.56

Read as much data as is immediately available on the stream. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to "utf-8" prior to calling ReadString.

Returns nil on failure

- (CkoTask *)ReadStringAsync;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadString method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (NSString *)ReadToCRLF;

Introduced in version 9.5.0.56

Reads the stream until a CRLF is received. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to "utf-8" prior to calling ReadString.

Note: If the end-of-stream is reached prior to receiving the CRLF, then the remaining data is returned, and the ReadFailReason property will be set to 3 (to indicate end-of-file). This is the only case where as string would be returned that does not end with CRLF.

Returns nil on failure

- (CkoTask *)ReadToCRLFAsync;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadToCRLF method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (NSString *)ReadUntilMatch:(NSString *)matchStr;

Introduced in version 9.5.0.56

Reads the stream until the string indicated by matchStr is received. If no data is immediately available, it waits up to ReadTimeoutMs milliseconds for data to arrive. The data is returned as a string. The incoming bytes are interpreted according to the StringCharset property. For example, if utf-8 bytes are expected, then StringCharset should be set to "utf-8" prior to calling ReadString.

Note: If the end-of-stream is reached prior to receiving the match string, then the remaining data is returned, and the ReadFailReason property will be set to 3 (to indicate end-of-file). This is the only case where as string would be returned that does not end with the desired match string.

Returns nil on failure

Firebase Receive Server-Sent Events (text/event-stream)

- (CkoTask *)ReadUntilMatchAsync:(NSString *)matchStr;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the ReadUntilMatch method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (void)Reset;

Introduced in version 9.5.0.56

Resets the stream. If a source or sink is open, then it is closed. Properties such as EndOfStream and IsWriteClose are reset to default values.

- (BOOL)RunStream;

Introduced in version 9.5.0.56

Runs the stream to completion. This method should only be called when the source of the string has been set by any of the following methods: SetSourceBytes, SetSourceString, or SetSourceStream, or when the SourceFile property has been set (giving the stream a file source).

This method will read the stream source and forward to the sink until the end-of-stream is reached, and all data has been written to the sink.

Returns YES for success, NO for failure.

Chaining Asynchronous Streams

- (CkoTask *)RunStreamAsync;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the RunStream method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (BOOL)SaveLastError:(NSString *)path;

Saves the last-error information (the contents of LastErrorXml) to an XML formatted file.

Returns YES for success, NO for failure.

- (BOOL)SetSinkStream:(CkoStream *)strm;

Introduced in version 9.5.0.56

Sets the stream's sink to strm. Any data written to this stream's sink will become available to strm on its source.

Returns YES for success, NO for failure.

- (BOOL)SetSourceBytes:(NSData *)sourceData;

Introduced in version 9.5.0.56

Sets the stream's source to the contents of sourceData.

Returns YES for success, NO for failure.

- (BOOL)SetSourceStream:(CkoStream *)strm;

Introduced in version 9.5.0.56

Sets the stream's source to be the sink of strm. Any data written to strm's sink will become available on this stream's source.

Returns YES for success, NO for failure.

Chaining Asynchronous Streams

- (BOOL)SetSourceString:(NSString *)srcStr
    charset:(NSString *)charset;

Introduced in version 9.5.0.56

Sets the stream's source to the contents of srcStr. The charset indicates the character encoding to be used for the byte representation of the srcStr.

Returns YES for success, NO for failure.

- (BOOL)WriteBd:(CkoBinData *)binData;

Introduced in version 9.5.0.67

Writes the contents of binData to the stream.

Returns YES for success, NO for failure.

- (CkoTask *)WriteBdAsync:(CkoBinData *)binData;

Introduced in version 9.5.0.67

Creates an asynchronous task to call the WriteBd method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (BOOL)WriteByte:(NSNumber *)byteVal;

Introduced in version 9.5.0.56

Writes a single byte to the stream. The byteVal must have a value from 0 to 255.

Returns YES for success, NO for failure.

- (CkoTask *)WriteByteAsync:(NSNumber *)byteVal;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the WriteByte method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (BOOL)WriteBytes:(NSData *)byteData;

Introduced in version 9.5.0.56

Writes binary bytes to a stream.

Returns YES for success, NO for failure.

- (CkoTask *)WriteBytesAsync:(NSData *)byteData;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the WriteBytes method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (BOOL)WriteBytesENC:(NSString *)byteData
    encoding:(NSString *)encoding;

Introduced in version 9.5.0.56

Writes binary bytes to a stream. The byte data is passed in encoded string form, where the encoding can be "base64", "hex", or any of the supported binary encodings listed at the link below.

Returns YES for success, NO for failure.

Binary Encodings Supported by Chilkat

- (CkoTask *)WriteBytesENCAsync:(NSString *)byteData
    encoding:(NSString *)encoding;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the WriteBytesENC method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (BOOL)WriteClose;

Introduced in version 9.5.0.56

Indicates that no more data will be written to the stream.

Returns YES for success, NO for failure.

- (BOOL)WriteSb:(CkoStringBuilder *)sb;

Introduced in version 9.5.0.67

Writes the contents of sb to the stream. The actual bytes written are the byte representation of the string as indicated by the StringCharset property. For example, to write utf-8 bytes, first set StringCharset equal to "utf-8" and then call WriteSb.

Returns YES for success, NO for failure.

- (CkoTask *)WriteSbAsync:(CkoStringBuilder *)sb;

Introduced in version 9.5.0.67

Creates an asynchronous task to call the WriteSb method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

- (BOOL)WriteString:(NSString *)str;

Introduced in version 9.5.0.56

Writes a string to a stream. The actual bytes written are the byte representation of the string as indicated by the StringCharset property. For example, to write utf-8 bytes, first set StringCharset equal to "utf-8" and then call WriteString.

Returns YES for success, NO for failure.

- (CkoTask *)WriteStringAsync:(NSString *)str;

Introduced in version 9.5.0.56

Creates an asynchronous task to call the WriteString method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Note: Async method event callbacks happen in the background thread. Accessing and updating UI elements existing in the main thread may require special considerations.

Returns nil on failure

How to Run an Asynchronous Task

Events

To implement an event callback, your application would define and implement a class that inherits from CkoBaseProgress. Your application can implement methods to override some or all of the default/empty method implementations of the CkoBaseProgress base class.

For example:

  CkoStream *stream = [[CkoStream alloc] init];

  MyStreamProgress *callbackObj = [[MyStreamProgress alloc] init];

  [stream setEventCallbackObject:callbackObj];

MyStreamProgress interface example:

#import "CkoStreamProgress.h"

@interface MyStreamProgress : CkoBaseProgress {

}

    - (id)init;
    - (void)dealloc;
    - (void)dispose;

    - (void)AbortCheck:(BOOL *)abort;

    - (void)BinaryData:(NSData *)data 
        length:(NSNumber *)length;

    - (void)PercentDone:(NSNumber *)pctDone 
        abort:(BOOL *)abort;

    - (void)ProgressInfo:(NSString *)name 
        value:(NSString *)value;

    - (void)TaskCompleted:(CkoTask *)task;

    - (void)TextData:(NSString *)data;

@end

- (void)AbortCheck:(BOOL *)abort;

Provides the opportunity for a method call to be aborted. The AbortCheck event is fired periodically based on the value of the HeartbeatMs property. If HeartbeatMs is 0, then no AbortCheck events will fire. As an example, to fire 5 AbortCheck events per second, set the HeartbeatMs property equal to 200.

- (void)BinaryData:(NSData *)data
    length:(NSNumber *)length;

Binary data provided by certain methods.

- (void)PercentDone:(NSNumber *)pctDone
    abort:(BOOL *)abort;

Provides the percentage completed for any method that involves network communications or time-consuming processing (assuming it is a method where a percentage completion can be measured). This event is only fired when it is possible to know a percentage completion, and when it makes sense to express the operation as a percentage completed. The pctDone argument will have a value from 1 to 100. For operations (Chilkat method calls) that complete very quickly, the number of PercentDone callbacks will vary, but the final callback should have a value of 100. For long running operations, no more than one callback per percentage point will occur (for example: 1, 2, 3, ... 98, 99, 100).

The PercentDone callback counts as an AbortCheck event. For method calls that complete quickly such that PercentDone events fire, it may be that AbortCheck events don't fire because the opportunity to abort is already provided in the PercentDone callback. For time consuming operations, where the amount of time between PercentDone callbacks are long, AbortCheck callbacks may be used to allow for the operation to be aborted in a more responsive manner.

The abort output argument provides a means for aborting the operation. Setting it to YES will cause the method to abort and return a failed status (or whatever return value indicates failure).

- (void)ProgressInfo:(NSString *)name
    value:(NSString *)value;

A general name/value event that provides information about what is happening during a method call. To find out what information is available, write code to handle this event and log the name/value pairs. Most are self-explanatory.

- (void)TaskCompleted:(CkoTask *)task;

Called in the background thread when an asynchronous task completes.

- (void)TextData:(NSString *)data;

Text data provided by certain methods.