CkSshTunnel Python Reference Documentation

CkSshTunnel

The SSH tunnel class provides for the ability to run a self-contained SSH tunnel in a background thread. It can behave as a SOCKS proxy, accepting connections from SOCKS4 or SOCK5 proxy clients and fowarding connections through an SSH tunnel. This is the "dynamic port forwarding" mode of operation. It can also behave in a static port forwarding mode (where it accepts connections and forwards the connection to a pre-defined remote destination IP:port).

Object Creation

obj = chilkat.CkSshTunnel()

Properties

# boolVal is a boolean
boolVal = sshTunnel.get_AbortCurrent();
sshTunnel.put_AbortCurrent(boolVal);

Introduced in version 9.5.0.58

When set to True, causes the currently running method to abort. Methods that always finish quickly (i.e.have no length file operations or network communications) are not affected. If no method is running, then this property is automatically reset to False when the next method is called. When the abort occurs, this property is reset to False. Both synchronous and asynchronous method calls can be aborted. (A synchronous method call could be aborted by setting this property from a separate thread.)

# strVal is a string
# ckStr is a CkString
sshTunnel.get_AcceptLog(ckStr);
strVal = sshTunnel.acceptLog();
sshTunnel.put_AcceptLog(strVal);

Contains an in-memory log of the listen thread. This will only contain content if the KeepAcceptLog property is True.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_AcceptLogPath(ckStr);
strVal = sshTunnel.acceptLogPath();
sshTunnel.put_AcceptLogPath(strVal);

Introduced in version 9.5.0.50

Specifies a log file to be kept for the activity in the listen thread.

# intVal is an integer
intVal = sshTunnel.get_ConnectTimeoutMs();
sshTunnel.put_ConnectTimeoutMs(intVal);

Maximum number of milliseconds to wait when connecting to an SSH server. The default value is 10000 (i.e. 10 seconds). A value of 0 indicates no timeout (wait forever).

# strVal is a string
# ckStr is a CkString
sshTunnel.get_DebugLogFilePath(ckStr);
strVal = sshTunnel.debugLogFilePath();
sshTunnel.put_DebugLogFilePath(strVal);

If set to a file path, causes each Chilkat method or property call to automatically append it's LastErrorText to the specified log file. The information is appended such that if a hang or crash occurs, it is possible to see the context in which the problem occurred, as well as a history of all Chilkat calls up to the point of the problem. The VerboseLogging property can be set to provide more detailed information.

This property is typically used for debugging the rare cases where a Chilkat method call hangs or generates an exception that halts program execution (i.e. crashes). A hang or crash should generally never happen. The typical causes of a hang are:

  1. a timeout related property was set to 0 to explicitly indicate that an infinite timeout is desired,
  2. the hang is actually a hang within an event callback (i.e. it is a hang within the application code), or
  3. there is an internal problem (bug) in the Chilkat code that causes the hang.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_DestHostname(ckStr);
strVal = sshTunnel.destHostname();
sshTunnel.put_DestHostname(strVal);

The destination hostname or IP address (in dotted decimal notation) of the service (such as a database server). Data sent through the SSH tunnel is forwarded by the SSH server to this destination. Data received from the destination (by the SSH server) is forwarded back to the client through the SSH tunnel.

# intVal is an integer
intVal = sshTunnel.get_DestPort();
sshTunnel.put_DestPort(intVal);

The destination port of the service (such as a database server).

# boolVal is a boolean
boolVal = sshTunnel.get_DynamicPortForwarding();
sshTunnel.put_DynamicPortForwarding(boolVal);

Introduced in version 9.5.0.50

If True, then this behaves as a SOCKS proxy server for inbound connections. When this property is True, the DestHostname and DestPort properties are unused because the destination IP:port is dynamically provided by the SOCKS client. The default value of this property is False.

When dynamic port forwarding is used, the InboundSocksVersion property must be set to 4 or 5. If inbound SOCKS5 is used, then the InboundSocksUsername and InboundSocksPassword may be set to the required login/password for a client to gain access.

SSH Tunnel with Dynamic Port Forwarding

# strVal is a string
# ckStr is a CkString
sshTunnel.get_HostKeyFingerprint(ckStr);
strVal = sshTunnel.hostKeyFingerprint();

Introduced in version 9.5.0.56

Set after connecting to an SSH server. The format of the fingerprint looks like this: "ssh-rsa 1024 68:ff:d1:4e:6c:ff:d7:b0:d6:58:73:85:07:bc:2e:d5"

# strVal is a string
# ckStr is a CkString
sshTunnel.get_HttpProxyAuthMethod(ckStr);
strVal = sshTunnel.httpProxyAuthMethod();
sshTunnel.put_HttpProxyAuthMethod(strVal);

If an HTTP proxy requiring authentication is to be used, set this property to the HTTP proxy authentication method name. Valid choices are "Basic" or "NTLM".

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through an HTTP proxy.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_HttpProxyDomain(ckStr);
strVal = sshTunnel.httpProxyDomain();
sshTunnel.put_HttpProxyDomain(strVal);

The NTLM authentication domain (optional) if NTLM authentication is used w/ the HTTP proxy.

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through an HTTP proxy.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_HttpProxyHostname(ckStr);
strVal = sshTunnel.httpProxyHostname();
sshTunnel.put_HttpProxyHostname(strVal);

If an HTTP proxy is to be used, set this property to the HTTP proxy hostname or IPv4 address (in dotted decimal notation).

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through an HTTP proxy.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_HttpProxyPassword(ckStr);
strVal = sshTunnel.httpProxyPassword();
sshTunnel.put_HttpProxyPassword(strVal);

If an HTTP proxy requiring authentication is to be used, set this property to the HTTP proxy password.

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through an HTTP proxy.

# intVal is an integer
intVal = sshTunnel.get_HttpProxyPort();
sshTunnel.put_HttpProxyPort(intVal);

If an HTTP proxy is to be used, set this property to the HTTP proxy port number. (Two commonly used HTTP proxy ports are 8080 and 3128.)

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through an HTTP proxy.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_HttpProxyUsername(ckStr);
strVal = sshTunnel.httpProxyUsername();
sshTunnel.put_HttpProxyUsername(strVal);

If an HTTP proxy requiring authentication is to be used, set this property to the HTTP proxy login name.

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through an HTTP proxy.

# intVal is an integer
intVal = sshTunnel.get_IdleTimeoutMs();
sshTunnel.put_IdleTimeoutMs(intVal);

A tunnel will fail when progress for sending or receiving data halts for more than this number of milliseconds. The default value is 10,000 (which is 10 seconds). A timeout of 0 indicates an infinite wait time (i.e. no timeout).

# strVal is a string
# ckStr is a CkString
sshTunnel.get_InboundSocksPassword(ckStr);
strVal = sshTunnel.inboundSocksPassword();
sshTunnel.put_InboundSocksPassword(strVal);

Introduced in version 9.5.0.50

If dynamic port forwarding is used, then this may be set to the password required for authenticating inbound connections.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_InboundSocksUsername(ckStr);
strVal = sshTunnel.inboundSocksUsername();
sshTunnel.put_InboundSocksUsername(strVal);

Introduced in version 9.5.0.50

If dynamic port forwarding is used, then this may be set to the username required for authenticating inbound connections. If no username is set, then the inbound connection needs no authentication.

# boolVal is a boolean
boolVal = sshTunnel.get_IsAccepting();

True if a background thread is running and accepting connections.

# boolVal is a boolean
boolVal = sshTunnel.get_KeepAcceptLog();
sshTunnel.put_KeepAcceptLog(boolVal);

If True, then an in-memory log of the listen thread is kept. The default value is False.

# boolVal is a boolean
boolVal = sshTunnel.get_KeepTunnelLog();
sshTunnel.put_KeepTunnelLog(boolVal);

Introduced in version 9.5.0.50

If True, then a log of the SSH tunnel thread activity is kept in memory. The default value is False.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_LastErrorHtml(ckStr);
strVal = sshTunnel.lastErrorHtml();

Provides information in HTML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_LastErrorText(ckStr);
strVal = sshTunnel.lastErrorText();

Provides information in plain-text format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

Concept of LastErrorText

LastErrorText Standard Information

# strVal is a string
# ckStr is a CkString
sshTunnel.get_LastErrorXml(ckStr);
strVal = sshTunnel.lastErrorXml();

Provides information in XML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

# boolVal is a boolean
boolVal = sshTunnel.get_LastMethodSuccess();
sshTunnel.put_LastMethodSuccess(boolVal);

Introduced in version 9.5.0.52

Indicate whether the last method call succeeded or failed. A value of True indicates success, a value of False indicates failure. This property is automatically set for method calls. It is not modified by property accesses. The property is automatically set to indicate success for the following types of method calls:

  • Any method that returns a string.
  • Any method returning a Chilkat object, binary bytes, or a date/time.
  • Any method returning a standard boolean status value where success = True and failure = False.
  • Any method returning an integer where failure is defined by a return value less than zero.

Note: Methods that do not fit the above requirements will always set this property equal to True. For example, a method that returns no value (such as a "void" in C++) will technically always succeed.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_ListenBindIpAddress(ckStr);
strVal = sshTunnel.listenBindIpAddress();
sshTunnel.put_ListenBindIpAddress(strVal);

In most cases, this property does not need to be set. It is provided for cases where it is required to bind the listen socket to a specific IP address (usually for computers with multiple network interfaces or IP addresses). For computers with a single network interface (i.e. most computers), this property should not be set. For multihoming computers, the default IP address is automatically used if this property is not set.

# intVal is an integer
intVal = sshTunnel.get_ListenPort();

If a port number equal to 0 is passed to BeginAccepting, then this property will contain the actual allocated port number used. Otherwise it is equal to the port number passed to BeginAccepting, or 0 if BeginAccepting was never called.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_OutboundBindIpAddress(ckStr);
strVal = sshTunnel.outboundBindIpAddress();
sshTunnel.put_OutboundBindIpAddress(strVal);

In most cases, this property does not need to be set. It is provided for cases where it is required to bind the socket that is to connect to the SSH server (in the background thread) to a specific IP address (usually for computers with multiple network interfaces or IP addresses). For computers with a single network interface (i.e. most computers), this property should not be set. For multihoming computers, the default IP address is automatically used if this property is not set.

# intVal is an integer
intVal = sshTunnel.get_OutboundBindPort();
sshTunnel.put_OutboundBindPort(intVal);

Unless there is a specific requirement for binding to a specific port, leave this unset (at the default value of 0). (99.9% of all users should never need to set this property.)

# boolVal is a boolean
boolVal = sshTunnel.get_PreferIpv6();
sshTunnel.put_PreferIpv6(boolVal);

Introduced in version 9.5.0.70

If True, then use IPv6 over IPv4 when both are supported for a particular domain. The default value of this property is False, which will choose IPv4 over IPv6.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_SocksHostname(ckStr);
strVal = sshTunnel.socksHostname();
sshTunnel.put_SocksHostname(strVal);

The SOCKS4/SOCKS5 hostname or IPv4 address (in dotted decimal notation). This property is only used if the SocksVersion property is set to 4 or 5).

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through a SOCKS4 or SOCKS5 proxy.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_SocksPassword(ckStr);
strVal = sshTunnel.socksPassword();
sshTunnel.put_SocksPassword(strVal);

The SOCKS5 password (if required). The SOCKS4 protocol does not include the use of a password, so this does not apply to SOCKS4.

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through a SOCKS4 or SOCKS5 proxy.

# intVal is an integer
intVal = sshTunnel.get_SocksPort();
sshTunnel.put_SocksPort(intVal);

The SOCKS4/SOCKS5 proxy port. The default value is 1080. This property only applies if a SOCKS proxy is used (if the SocksVersion property is set to 4 or 5).

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through a SOCKS4 or SOCKS5 proxy.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_SocksUsername(ckStr);
strVal = sshTunnel.socksUsername();
sshTunnel.put_SocksUsername(strVal);

The SOCKS4/SOCKS5 proxy username. This property is only used if the SocksVersion property is set to 4 or 5).

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through a SOCKS4 or SOCKS5 proxy.

# intVal is an integer
intVal = sshTunnel.get_SocksVersion();
sshTunnel.put_SocksVersion(intVal);

SocksVersion May be set to one of the following integer values:

0 - No SOCKS proxy is used. This is the default.
4 - Connect via a SOCKS4 proxy.
5 - Connect via a SOCKS5 proxy.

Note: This is for the outbound connection to the SSH server. It is used when the outbound connection to the SSH server must go through a SOCKS4 or SOCKS5 proxy.

# intVal is an integer
intVal = sshTunnel.get_SoRcvBuf();
sshTunnel.put_SoRcvBuf(intVal);

Sets the receive buffer size socket option. Normally, this property should be left unchanged. The default value is 4194304.

This property can be increased if download performance seems slow. It is recommended to be a multiple of 4096.

More Information about TCP performance and Buffer Sizes

# intVal is an integer
intVal = sshTunnel.get_SoSndBuf();
sshTunnel.put_SoSndBuf(intVal);

Sets the send buffer size socket option. Normally, this property should be left unchanged. The default value is 262144.

This property can be increased if upload performance seems slow. It is recommended to be a multiple of 4096. Testing with sizes such as 512K and 1MB is reasonable.

More Information about TCP performance and Buffer Sizes

# boolVal is a boolean
boolVal = sshTunnel.get_TcpNoDelay();
sshTunnel.put_TcpNoDelay(boolVal);

Controls whether the TCP_NODELAY socket option is used for the underlying TCP/IP socket. The default value is False. Setting this property equal to True disables the Nagle algorithm and allows for better performance when small amounts of data are sent.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_TunnelLog(ckStr);
strVal = sshTunnel.tunnelLog();
sshTunnel.put_TunnelLog(strVal);

Introduced in version 9.5.0.50

Contains an in-memory log of the SSH tunnel thread. This will only contain content if the KeepTunnelLog property is True.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_TunnelLogPath(ckStr);
strVal = sshTunnel.tunnelLogPath();
sshTunnel.put_TunnelLogPath(strVal);

Introduced in version 9.5.0.50

Set to keep a log file of the SSH tunnel thread.

# boolVal is a boolean
boolVal = sshTunnel.get_Utf8();
sshTunnel.put_Utf8(boolVal);

When set to True, all "const char *" arguments are interpreted as utf-8 strings. If set to False (the default), then "const char *" arguments are interpreted as ANSI strings. Also, when set to True, and Chilkat method returning a "const char *" is returning the utf-8 representation. If set to False, all "const char *" return values are ANSI strings.

# boolVal is a boolean
boolVal = sshTunnel.get_VerboseLogging();
sshTunnel.put_VerboseLogging(boolVal);

If set to True, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. The default value is False. Verbose logging should only be used for debugging. The potentially large quantity of logged information may adversely affect peformance.

# strVal is a string
# ckStr is a CkString
sshTunnel.get_Version(ckStr);
strVal = sshTunnel.version();

Version of the component/library, such as "9.5.0.63"

Methods

# username is a string
# privateKey is a CkSshKey
status = sshTunnel.AuthenticatePk(username, privateKey);

Introduced in version 9.5.0.50

Authenticates with the SSH server using public-key authentication. The corresponding public key must have been installed on the SSH server for the username. Authentication will succeed if the matching privateKey is provided.

Important: When reporting problems, please send the full contents of the LastErrorText property to support@chilkatsoft.com.

Returns True for success, False for failure.

Beware of too much time between connect and authentication.

Use PuTTY Key for SSH Tunnel (PPK Private Key)

# returns a CkTask
# username is a string
# privateKey is a CkSshKey
ret_task = sshTunnel.AuthenticatePkAsync(username, privateKey);

Introduced in version 9.5.0.50

Creates an asynchronous task to call the AuthenticatePk method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns None on failure

How to Run an Asynchronous Task

# login is a string
# password is a string
status = sshTunnel.AuthenticatePw(login, password);

Introduced in version 9.5.0.50

Authenticates with the SSH server using a login and password.

An SSH session always begins by first calling Connect to connect to the SSH server, and then calling either AuthenticatePw or AuthenticatePk to login.

Important: When reporting problems, please send the full contents of the LastErrorText property to support@chilkatsoft.com.
Note: To learn about how to handle password change requests, see the PasswordChangeRequested property (above).

Returns True for success, False for failure.

Beware of too much time between connect and authentication.

# returns a CkTask
# login is a string
# password is a string
ret_task = sshTunnel.AuthenticatePwAsync(login, password);

Introduced in version 9.5.0.50

Creates an asynchronous task to call the AuthenticatePw method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns None on failure

How to Run an Asynchronous Task

# username is a string
# password is a string
# privateKey is a CkSshKey
status = sshTunnel.AuthenticatePwPk(username, password, privateKey);

Introduced in version 9.5.0.50

Authentication for SSH servers that require both a password and private key. (Most SSH servers are configured to require one or the other, but not both.)

Important: When reporting problems, please send the full contents of the LastErrorText property to support@chilkatsoft.com.

Returns True for success, False for failure.

# returns a CkTask
# username is a string
# password is a string
# privateKey is a CkSshKey
ret_task = sshTunnel.AuthenticatePwPkAsync(username, password, privateKey);

Introduced in version 9.5.0.50

Creates an asynchronous task to call the AuthenticatePwPk method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns None on failure

How to Run an Asynchronous Task

# login is a CkSecureString
# password is a CkSecureString
status = sshTunnel.AuthenticateSecPw(login, password);

Introduced in version 9.5.0.71

The same as AuthenticatePw, except the login and password strings are passed in secure string objects.

Returns True for success, False for failure.

SSH Tunnel Authenticate Secure

# returns a CkTask
# login is a CkSecureString
# password is a CkSecureString
ret_task = sshTunnel.AuthenticateSecPwAsync(login, password);

Introduced in version 9.5.0.71

Creates an asynchronous task to call the AuthenticateSecPw method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns None on failure

How to Run an Asynchronous Task

# username is a CkSecureString
# password is a CkSecureString
# privateKey is a CkSshKey
status = sshTunnel.AuthenticateSecPwPk(username, password, privateKey);

Introduced in version 9.5.0.71

The same as AuthenticatePwPk, except the login and password strings are passed in secure string objects.

Returns True for success, False for failure.

# returns a CkTask
# username is a CkSecureString
# password is a CkSecureString
# privateKey is a CkSshKey
ret_task = sshTunnel.AuthenticateSecPwPkAsync(username, password, privateKey);

Introduced in version 9.5.0.71

Creates an asynchronous task to call the AuthenticateSecPwPk method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns None on failure

How to Run an Asynchronous Task

# listenPort is an integer
status = sshTunnel.BeginAccepting(listenPort);

Starts a background thread for listening on listenPort. A new SSH tunnel is created and managed for each accepted connection. SSH tunnels are managed in a 2nd background thread: the SSH tunnel pool thread.

BeginAccepting starts a background thread that creates a socket, binds to the port, and begins listening. If the bind fails (meaning something else may have already bound to the same port), then the background thread exits. You may check to see if BeginAccepting succeeds by waiting a short time (perhaps 50 millisec) and then examine the IsAccepting property. If it is False, then BeginAccepting failed.

Returns True for success, False for failure.

SSH Tunnel for Database Connection (such as ADO, ODBC, etc.)

# returns a CkTask
# listenPort is an integer
ret_task = sshTunnel.BeginAcceptingAsync(listenPort);

Creates an asynchronous task to call the BeginAccepting method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns None on failure

How to Run an Asynchronous Task

# waitForThreads is a boolean
status = sshTunnel.CloseTunnel(waitForThreads);

Introduced in version 9.5.0.50

Closes the SSH tunnel and disconnects all existing clients. If waitForThreads is True, the method will wait for the tunnel and client threads to exit before returning.

Returns True for success, False for failure.

# hostname is a string
# port is an integer
status = sshTunnel.Connect(hostname, port);

Introduced in version 9.5.0.50

Connects to the SSH server to be used for SSH tunneling.

Returns True for success, False for failure.

SSH Tunnel with Dynamic Port Forwarding

# returns a CkTask
# hostname is a string
# port is an integer
ret_task = sshTunnel.ConnectAsync(hostname, port);

Introduced in version 9.5.0.50

Creates an asynchronous task to call the Connect method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns None on failure

How to Run an Asynchronous Task

# ssh is a CkSsh
# hostname is a string
# port is an integer
status = sshTunnel.ConnectThroughSsh(ssh, hostname, port);

Introduced in version 9.5.0.55

Connects to an SSH server through an existing SSH connection. The ssh is an existing connected and authenticated SSH object. The connection to hostname:port is made through the existing SSH connection via port-forwarding. If successful, the connection is as follows: application => ServerSSH1 => ServerSSH2. (where ServerSSH1 is the ssh and ServerSSH2 is the SSH server at hostname:port) Once connected in this way, all communications are routed through ServerSSH1 to ServerSSH2. This includes authentication -- which means the application must still call one of the Authenticate* methods to authenticate with ServerSSH2.

Returns True for success, False for failure.

# returns a CkTask
# ssh is a CkSsh
# hostname is a string
# port is an integer
ret_task = sshTunnel.ConnectThroughSshAsync(ssh, hostname, port);

Introduced in version 9.5.0.55

Creates an asynchronous task to call the ConnectThroughSsh method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns None on failure

How to Run an Asynchronous Task

# waitForThreads is a boolean
status = sshTunnel.DisconnectAllClients(waitForThreads);

Introduced in version 9.5.0.50

Disconnects all clients, keeping the SSH tunnel open. If waitForThreads is True, the method will wait for the client threads to exit before returning.

Returns True for success, False for failure.

# outStr is a CkString (output)
status = sshTunnel.GetCurrentState(outStr);
retStr = sshTunnel.getCurrentState();

Introduced in version 9.5.0.65

Returns the current state of existing tunnels in an XML string.

Returns True for success, False for failure.

retBool = sshTunnel.IsSshConnected();

Introduced in version 9.5.0.61

Returns True if connected to the SSH server. Returns False if the connection has been lost (or was never established).

# path is a string
status = sshTunnel.SaveLastError(path);

Saves the last-error information (the contents of LastErrorXml) to an XML formatted file.

Returns True for success, False for failure.

# waitForThread is a boolean
status = sshTunnel.StopAccepting(waitForThread);

Stops the listen background thread. It is possible to continue accepting connections by re-calling BeginAccepting. If waitForThread is True, the method will wait for the listen thread to exit before returning.

Returns True for success, False for failure.

# unlockCode is a string
status = sshTunnel.UnlockComponent(unlockCode);

Unlocks the component. This must be called once prior to calling any other method. A fully-functional 30-day trial is automatically started when an arbitrary string is passed to this method. For example, passing "Hello", or "abc123" will unlock the component for the 1st thirty days after the initial install.

Returns True for success, False for failure.

Diagnosing UnlockComponent Problems

UnlockComponent LastErrorText shows exact string passed to it.

Verify UnlockComponent Success w/ Purchased Unlock Code

LastErrorText Standard Information