Zip Tcl Reference Documentation

Zip

Zip compression component.

Object Creation

set myZip [new CkZip]

Properties

AbortCurrent (boolean 1/0)

set boolVal [CkZip_get_AbortCurrent $myZip]
CkZip_put_AbortCurrent $myZip $boolVal

Introduced in version 9.5.0.58

When set to 1, causes the currently running method to abort. Methods that always finish quickly (i.e.have no length file operations or network communications) are not affected. If no method is running, then this property is automatically reset to 0 when the next method is called. When the abort occurs, this property is reset to 0. Both synchronous and asynchronous method calls can be aborted. (A synchronous method call could be aborted by setting this property from a separate thread.)

AppendFromDir (string)

# ckStr is a CkString
CkZip_get_AppendFromDir $myZip $ckStr
set strVal [CkZip_get_appendFromDir $myZip]
CkZip_put_AppendFromDir $myZip $strVal

When files are added to a Zip archive, they are appended from this directory. For example, to add all the files under c:/abc/123/myAppDir, this property could be set to "c:/abc/123", and "myAppDir/*" would be passed to AppendFiles. The path that is saved in the .zip would be "myAppDir/". (The value of the AppendFromDir property does not become part of the file path saved in the .zip.)

Controlling Paths of Files Added to Zip

AutoRun (string)

# ckStr is a CkString
CkZip_get_AutoRun $myZip $ckStr
set strVal [CkZip_get_autoRun $myZip]
CkZip_put_AutoRun $myZip $strVal

(Relevant only when running on a Microsoft Windows operating system.) Optional when creating Windows-based self-extracting EXEs. This is the name of an executable contained within the to-be-created EXE that will automatically be run after extraction. (This is typically something like "setup.exe")

AutoRunParams (string)

# ckStr is a CkString
CkZip_get_AutoRunParams $myZip $ckStr
set strVal [CkZip_get_autoRunParams $myZip]
CkZip_put_AutoRunParams $myZip $strVal

(Relevant only when running on a Microsoft Windows operating system.) Command line parameters that get passed to the AutoRun executable.

AutoTemp (boolean 1/0)

set boolVal [CkZip_get_AutoTemp $myZip]
CkZip_put_AutoTemp $myZip $boolVal

(Relevant only when running on a Microsoft Windows operating system.) This option applies to creating Windows-based self-extracting EXEs. If 1, the to-be-created EXE will automatically select and create a temporary directory for unzipping. This property is often used in conjunction with the AutoRun property to create a self-extracting EXE that automatically unzips to a temp directory and runs a setup.exe without interaction with the user.

Note: To create a self-extracting EXE with no user-interaction, set the following properties to these values:

ExeSilentProgress = 0
ExeNoInterface = 1
ExeFinishNotifier = 0

The default AutoTemp value is 0.

CaseSensitive (boolean 1/0)

set boolVal [CkZip_get_CaseSensitive $myZip]
CkZip_put_CaseSensitive $myZip $boolVal

If 1 then all methods that get or search for zip entries by name will use case-sensitive filename matching. If 0 then filename matching will be case insensitive. Methods affected by this property include GetEntryByName, UnzipMatching, FirstMatchingEntry, etc.

The default value is 0.

ClearArchiveAttribute (boolean 1/0)

set boolVal [CkZip_get_ClearArchiveAttribute $myZip]
CkZip_put_ClearArchiveAttribute $myZip $boolVal

Set this to 1 to clear the FILE_ATTRIBUTE_ARCHIVE file attribute of each file during a zipping operation.

The default value is 0.

ClearReadOnlyAttr (boolean 1/0)

set boolVal [CkZip_get_ClearReadOnlyAttr $myZip]
CkZip_put_ClearReadOnlyAttr $myZip $boolVal

If 1, the read-only attribute is automatically cleared when unzipping. The default value of this property is 0, which leaves the read-only attribute unchanged when unzipping.

Comment (string)

# ckStr is a CkString
CkZip_get_Comment $myZip $ckStr
set strVal [CkZip_get_comment $myZip]
CkZip_put_Comment $myZip $strVal

The global Zip file comment.

DebugLogFilePath (string)

# ckStr is a CkString
CkZip_get_DebugLogFilePath $myZip $ckStr
set strVal [CkZip_get_debugLogFilePath $myZip]
CkZip_put_DebugLogFilePath $myZip $strVal

If set to a file path, causes each Chilkat method or property call to automatically append it's LastErrorText to the specified log file. The information is appended such that if a hang or crash occurs, it is possible to see the context in which the problem occurred, as well as a history of all Chilkat calls up to the point of the problem. The VerboseLogging property can be set to provide more detailed information.

This property is typically used for debugging the rare cases where a Chilkat method call hangs or generates an exception that halts program execution (i.e. crashes). A hang or crash should generally never happen. The typical causes of a hang are:

  1. a timeout related property was set to 0 to explicitly indicate that an infinite timeout is desired,
  2. the hang is actually a hang within an event callback (i.e. it is a hang within the application code), or
  3. there is an internal problem (bug) in the Chilkat code that causes the hang.

DecryptPassword (string)

# ckStr is a CkString
CkZip_get_DecryptPassword $myZip $ckStr
set strVal [CkZip_get_decryptPassword $myZip]
CkZip_put_DecryptPassword $myZip $strVal

When opening a password-protected or AES encrypted Zip, this is the password to be used for decryption. Encrypted Zips may be opened without setting a password, but the contents cannot be unzipped without setting this password.

Note:The SetPassword method has the effect of setting both this property as well as the EncryptPassword property. The SetPassword method should no longer be used. It has been replaced by the DecryptPassword and EncryptPassword properties to make it possible to open an encrypted zip and re-write it with a new password.

DiscardPaths (boolean 1/0)

set boolVal [CkZip_get_DiscardPaths $myZip]
CkZip_put_DiscardPaths $myZip $boolVal

If 1, discards all file path information when zipping. The default value is 0.

Encryption (integer)

set intVal [CkZip_get_Encryption $myZip]
CkZip_put_Encryption $myZip $intVal

Indicate whether the Zip is to be strong encrypted or not. Valid values are 0 (not encrypted) or 4 (AES encrypted). When this property is set to the value 4, WinZip AES compatible encrypted zip archives are produced.

Note: Prior to Chilkat v9.4.1, other possible values for this property were: 1 (blowfish), 2 (twofish), and 3 (rijndael). These settings originally provided a way to produce strong encrypted zips prior to when the AES encrypted Zip standard existed. Using these legacy values (1, 2, or 3) produced encrypted zips that only applications using Chilkat could read. Chilkat no longer supports these custom modes of encryption. If using an older version of Chilkat with one of these deprecated encryption modes, make sure to decrypt using the old Chilkat version and re-encrypt using mode 4 (WinZip compatible AES encryption) prior to updating to the new Chilkat version.

Important:The Encryption and PasswordProtect properties are mutually exclusive. PasswordProtect corresponds to the older Zip 2.0 encryption, commonly referred to as a "password-protected" zip. If the PasswordProtect is set to 1, the Encryption property should be set to 0. If the Encryption property is set to a non-zero value, then PasswordProtect should be set to 0. A zip cannot be both password-protected and strong-encrypted.

EncryptKeyLength (integer)

set intVal [CkZip_get_EncryptKeyLength $myZip]
CkZip_put_EncryptKeyLength $myZip $intVal

The encryption key length if AES, Blowfish, Twofish, or WinZip-compatible AES encryption is used. This value must be 128, 192, or 256. The default value is 128.

EncryptPassword (string)

# ckStr is a CkString
CkZip_get_EncryptPassword $myZip $ckStr
set strVal [CkZip_get_encryptPassword $myZip]
CkZip_put_EncryptPassword $myZip $strVal

The password used when writing a password-protected or strong-encrytped Zip.

Note:The SetPassword method has the effect of setting both this property as well as the DecryptPassword property. The SetPassword method should no longer be used. It has been replaced by the DecryptPassword and EncryptPassword properties to make it possible to open an encrypted zip and re-write it with a new password.

ExeDefaultDir (string)

# ckStr is a CkString
CkZip_get_ExeDefaultDir $myZip $ckStr
set strVal [CkZip_get_exeDefaultDir $myZip]
CkZip_put_ExeDefaultDir $myZip $strVal

(Relevant only when running on a Microsoft Windows operating system.) Specifies the default unzip directory path to appear in the user-interface dialog box when the Windows-based self-extracting EXE is run.

ExeFinishNotifier (boolean 1/0)

set boolVal [CkZip_get_ExeFinishNotifier $myZip]
CkZip_put_ExeFinishNotifier $myZip $boolVal

(Relevant only when running on a Microsoft Windows operating system.) If set to 1, a "Finished" dialog box is displayed when the self-extracting EXE is finished extracting. The caption, title, and button text of the finish notifier dialog may be customized by calling SetExeConfigParam. The default value is 0.

ExeIconFile (string)

# ckStr is a CkString
CkZip_get_ExeIconFile $myZip $ckStr
set strVal [CkZip_get_exeIconFile $myZip]
CkZip_put_ExeIconFile $myZip $strVal

(Relevant only when running on a Microsoft Windows operating system.) Applies to creating self-extracting EXEs. This property can be set to a pre-existing icon filename (.ico) that will be embedded within the to-be-created EXE and set as its default icon.

Note: This property is only possible for 32-bit applications. (Meaning that the application that is creating the self-extracting EXE must be a 32-bit application if an ExeIconFile is to be used.)

ExeNoInterface (boolean 1/0)

set boolVal [CkZip_get_ExeNoInterface $myZip]
CkZip_put_ExeNoInterface $myZip $boolVal

(Relevant only when running on a Microsoft Windows operating system.) Applies to creating Windows-based self-extracting EXEs. When set to 1, the to-be-created EXE will run without a user-interface. The default value is 0.

Note: The ExeSilentProgress property needs to be set to 1 for the extract to be truly silent.

Important: If the AutoTemp property = 1 and there is no AutoRun EXE, and there is no ExeUnzipDir set, then the self-extracting EXE will always display a dialog to get the unzip directory. The reason is that it makes no sense to silently unzip to an auto-selected (and unknown) temp directory without anything happening afterwards.

Important: If the self-extracting EXE is encrypted, a password dialog will be displayed. The password dialog may be suppressed if the password is provided on the command line via the -pwd command-line option.

ExeSilentProgress (boolean 1/0)

set boolVal [CkZip_get_ExeSilentProgress $myZip]
CkZip_put_ExeSilentProgress $myZip $boolVal

(Relevant only when running on a Microsoft Windows operating system.) Determines whether a progress dialog is displayed when the self-extracting EXE is run. If ExeNoInterface = 0 (i.e. there is a main dialog with the ability to select the unzip directory), then the progress dialog is (by default) shown as a progress bar within the main dialog -- and this property has no effect. If ExeNoInterface = 1, then a progress-only dialog is displayed if ExeSilentProgress = 0. The default value of ExeSilentProgress is 1.

ExeTitle (string)

# ckStr is a CkString
CkZip_get_ExeTitle $myZip $ckStr
set strVal [CkZip_get_exeTitle $myZip]
CkZip_put_ExeTitle $myZip $strVal

(Relevant only when running on a Microsoft Windows operating system.) Applies to creating Windows-based self-extracting EXEs. Sets the title of the main user-interface dialog that appears when the self-extracting EXE runs.

ExeUnzipCaption (string)

# ckStr is a CkString
CkZip_get_ExeUnzipCaption $myZip $ckStr
set strVal [CkZip_get_exeUnzipCaption $myZip]
CkZip_put_ExeUnzipCaption $myZip $strVal

(Relevant only when running on a Microsoft Windows operating system.) Applies to creating MS Windows-based self-extracting EXEs. Sets the unzipping caption of the main user-interface dialog that appears when the self-extracting EXE runs.

ExeUnzipDir (string)

# ckStr is a CkString
CkZip_get_ExeUnzipDir $myZip $ckStr
set strVal [CkZip_get_exeUnzipDir $myZip]
CkZip_put_ExeUnzipDir $myZip $strVal

(Relevant only when running on a Microsoft Windows operating system.) Applies to creating MS Windows self-extracting EXEs. Stores a pre-defined unzip directory within the self-extracting EXE so that it automatically unzips to this directory without user-intervention.

Environment variables may be included if surrounded by percent characters. For example: %TEMP%. Environment variables are expanded (i.e. resolved) when the self-extracting EXE runs.

Note: To create a self-extracting EXE with no user-interaction, set the following properties to these values:

ExeSilentProgress = 0
ExeNoInterface = 1
ExeFinishNotifier = 0

ExeWaitForSetup (boolean 1/0)

set boolVal [CkZip_get_ExeWaitForSetup $myZip]
CkZip_put_ExeWaitForSetup $myZip $boolVal

(Relevant only when running on a Microsoft Windows operating system.) If 1, the self-extracting EXE will wait for the AutoRun EXE to complete before it exits. If 0, the self-extracting EXE dialog (or process if running silently with no user-interface), is allowed to exit prior to the completion of the AutoRun EXE. The default value is 1.

ExeXmlConfig (string)

# ckStr is a CkString
CkZip_get_ExeXmlConfig $myZip $ckStr
set strVal [CkZip_get_exeXmlConfig $myZip]
CkZip_put_ExeXmlConfig $myZip $strVal

(Relevant only when running on a Microsoft Windows operating system.) Allows for an XML config document to be used to specify all possible options for self-extracting EXEs. This property is a string containing the XML config document.

The XML should have this format:

<SfxConfig>
	<ErrPwdTitle>Title for incorrect password dialog</ErrPwdTitle>
	<ErrPwdCaption>Caption for incorrect password dialog</ErrPwdCaption>
	<FinOkBtn>Text on finish notifier button</FinOkBtn>
	<PwdOkBtn>Text on password challenge dialog's "OK" button.</PwdOkBtn>
	<PwdCancelBtn>Text on password challenge dialog's Cancel button.</PwdCancelBtn>
	<ErrInvalidPassword>Incorrect password error message.</ErrInvalidPassword>
	<MainUnzipBtn>Text on main dialog's unzip button</MainUnzipBtn>
	<MainCloseBtn>Text on main dialog's quit/exit button</MainCloseBtn>
	<MainBrowseBtn>Text on main dialog's browse-for-directory button.</MainBrowseBtn>
	<MainUnzipLabel>Caption displayed in main dialog.</MainUnzipLabel>
	<AutoTemp>"1|0 (Maps to the AutoTemp property)"</AutoTemp>
	<Cleanup>"1|0 (Deletes extracted files after the SetupExe is run.)"</Cleanup>
	<Debug>"1|0  (If 1, the EXE will not extract any files.)"</Debug>
	<Verbose>"1|0 (If 1, then verbose information is sent to the log.)"</Verbose>
	<ShowFin>"1|0" Maps to ExeFinishNotifier property.</ShowFin>
	<ShowMain>"1|0" Maps to ExeNoInterface property.</ShowMain>
	<ShowProgress>"1|0" Maps to ExeSilentProgress property.</ShowProgress>
	<WaitForSetup>"1|0" Maps to ExeWaitForSetup property.</WaitForSetup>
	<Encryption>"1|0"  1=Yes, 0=No</Encryption>
	<KeyLength>128|192|256</KeyLength>
	<SetupExe>EXE to run after extracting. (Maps to AutoRun property)</SetupExe>
	<UnzipDir>Pre-defined unzip directory. (Maps to ExeUnzipDir property)>
	<DefaultDir>Default unzip directory to appear in the main dialog. 
                                                (Maps to ExeDefaultDir property)</DefaultDir>
	<IconFile>Icon file to be used (Maps to ExeIconFile property)</IconFile>
	<Url>Maps to ExeSourceUrl property.</Url>
	<MainTitle>Maps to ExeTitle property.</MainTitle>
	<MainCaption>Maps to ExeUnzipCaption property.</MainCaption>
	<FinTitle>Title for the finish notifier dialog.</FinTitle>
	<FinCaption>Caption for the finish notifier dialog.</FinTitle>
	<ProgressTitle>Title for the progress dialog.</ProgressTitle>
	<ProgressCaption>Caption for the progress dialog.</ProgressCaption>
	<PwTitle>Title for the password challenge dialog.</PwTitle>
	<PwCaption>Caption for the password challenge dialog.</PwCaption>
</SfxConfig>

A self-extracting EXE can be run from the command line with the "-log {logFilePath}" option to create a log with information for debugging.

FileCount (integer)

set intVal [CkZip_get_FileCount $myZip]

The number of files (excluding directories) contained within the Zip.

FileName (string)

# ckStr is a CkString
CkZip_get_FileName $myZip $ckStr
set strVal [CkZip_get_fileName $myZip]
CkZip_put_FileName $myZip $strVal

The path (absolute or relative) of the Zip archive. This is the path of the file that is created or overwritten when the zip is saved.

HasZipFormatErrors (boolean 1/0)

set boolVal [CkZip_get_HasZipFormatErrors $myZip]

1 if the opened zip contained file format errors (that were not severe enough to prevent the zip from being opened and parsed).

IgnoreAccessDenied (boolean 1/0)

set boolVal [CkZip_get_IgnoreAccessDenied $myZip]
CkZip_put_IgnoreAccessDenied $myZip $boolVal

If 1, then files that cannot be read due to "access denied" (i.e. a file permission error) will be ignored and the call to WriteZip, WriteZipAndClose, WriteExe, etc. will return a success status. If 0, then the "access denied" filesystem errors are not ignored and any occurrence will cause the zip writing to fail. The default value is 1.

LastErrorHtml (string)

# ckStr is a CkString
CkZip_get_LastErrorHtml $myZip $ckStr
set strVal [CkZip_get_lastErrorHtml $myZip]

Provides information in HTML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

LastErrorText (string)

# ckStr is a CkString
CkZip_get_LastErrorText $myZip $ckStr
set strVal [CkZip_get_lastErrorText $myZip]

Provides information in plain-text format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

Concept of LastErrorText

LastErrorText Standard Information

LastErrorXml (string)

# ckStr is a CkString
CkZip_get_LastErrorXml $myZip $ckStr
set strVal [CkZip_get_lastErrorXml $myZip]

Provides information in XML format about the last method/property called. If a method call returns a value indicating failure, or behaves unexpectedly, examine this property to get more information.

LastMethodSuccess (boolean 1/0)

set boolVal [CkZip_get_LastMethodSuccess $myZip]
CkZip_put_LastMethodSuccess $myZip $boolVal

Introduced in version 9.5.0.52

Indicate whether the last method call succeeded or failed. A value of 1 indicates success, a value of 0 indicates failure. This property is automatically set for method calls. It is not modified by property accesses. The property is automatically set to indicate success for the following types of method calls:

  • Any method that returns a string.
  • Any method returning a Chilkat object, binary bytes, or a date/time.
  • Any method returning a standard boolean status value where success = 1 and failure = 0.
  • Any method returning an integer where failure is defined by a return value less than zero.

Note: Methods that do not fit the above requirements will always set this property equal to 1. For example, a method that returns no value (such as a "void" in C++) will technically always succeed.

NumEntries (integer)

set intVal [CkZip_get_NumEntries $myZip]

The number of entries in the Zip, including both files and directories.

OemCodePage (integer)

set intVal [CkZip_get_OemCodePage $myZip]
CkZip_put_OemCodePage $myZip $intVal

Sets the OEM code page to be used for Unicode filenames. This property defaults to the OEM code page of the computer.

OverwriteExisting (boolean 1/0)

set boolVal [CkZip_get_OverwriteExisting $myZip]
CkZip_put_OverwriteExisting $myZip $boolVal

Determines whether existing files are overwritten during unzipping. The default is 1, which means that already-existing files will be overwritten. Set this property = 0 to prevent existing files from being overwritten when unzipping.

PasswordProtect (boolean 1/0)

set boolVal [CkZip_get_PasswordProtect $myZip]
CkZip_put_PasswordProtect $myZip $boolVal

1 if the Zip should be password-protected using older Zip 2.0 encryption, commonly referred to as "password-protection".

This property is set when a zip archive is opened by any of the Open* methods, such as OpenZip, OpenFromMemory, etc.

PathPrefix (string)

# ckStr is a CkString
CkZip_get_PathPrefix $myZip $ckStr
set strVal [CkZip_get_pathPrefix $myZip]
CkZip_put_PathPrefix $myZip $strVal

A prefix that is added to each filename when zipping. One might set the PathPrefix to "subdir/" so that files are unzipped to a specified subdirectory when unzipping.

How to Add a Directory Path to Files when Zipping

TempDir (string)

# ckStr is a CkString
CkZip_get_TempDir $myZip $ckStr
set strVal [CkZip_get_tempDir $myZip]
CkZip_put_TempDir $myZip $strVal

The temporary directory to use when unzipping files. When running in ASP or ASP.NET, the default value of TempDir is set to the directory where the .zip is being written. Set this property to override the default.

TextFlag (boolean 1/0)

set boolVal [CkZip_get_TextFlag $myZip]
CkZip_put_TextFlag $myZip $boolVal

If set to 1, the component will set the "text flag" for each file having these filename extensions: .txt, .xml, .htm, and .html. It will also preserve the "text flag" for existing zips that are opened and rewritten. By default, this property is set to 0.

It is generally not necessary to set the text flag for a zip entry.

Utf8 (boolean 1/0)

set boolVal [CkZip_get_Utf8 $myZip]
CkZip_put_Utf8 $myZip $boolVal

When set to 1, all "const char *" arguments are interpreted as utf-8 strings. If set to 0 (the default), then "const char *" arguments are interpreted as ANSI strings. Also, when set to 1, and Chilkat method returning a "const char *" is returning the utf-8 representation. If set to 0, all "const char *" return values are ANSI strings.

VerboseLogging (boolean 1/0)

set boolVal [CkZip_get_VerboseLogging $myZip]
CkZip_put_VerboseLogging $myZip $boolVal

If set to 1, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. The default value is 0. Verbose logging should only be used for debugging. The potentially large quantity of logged information may adversely affect peformance.

Version (string)

# ckStr is a CkString
CkZip_get_Version $myZip $ckStr
set strVal [CkZip_get_version $myZip]

Version of the component/library, such as "9.5.0.63"

Zipx (boolean 1/0)

set boolVal [CkZip_get_Zipx $myZip]
CkZip_put_Zipx $myZip $boolVal

Starting in v9.4.1, Chilkat Zip will automatically unzip ZIPX files using any of the following compression methods: BZIP2, PPMd, LZMA, and Deflate64 ("Deflate64" is a trademark of PKWare, Inc.)

This property, however, controls whether or not a ZipX is automatically produced where the best compression algorithm for each file is automatically chosen based on file type. This property is for writing zip archives. It does not apply to when unzipping ZIPX archives, Chilkat Zip automatically handles the various compression algorithms when unzipping.

ZipxDefaultAlg (string)

# ckStr is a CkString
CkZip_get_ZipxDefaultAlg $myZip $ckStr
set strVal [CkZip_get_zipxDefaultAlg $myZip]
CkZip_put_ZipxDefaultAlg $myZip $strVal

The default compression algorithm to be used when creating ZIPX archives. The default value is "deflate". Other possible values are "ppmd", "lzma", "bzip2" and "deflate64". When writing a ZIPX archive, if the file extension does not indicate an obvious choice for the appropriate compression algorithm, then the ZipxDefaultAlg is used.

Methods

# exeFilename is a string
# resourceName is a string
# zipFilename is a string
set status [CkZip_AddEmbedded $exeFilename $resourceName $zipFilename]

(Relevant only when running on a Microsoft Windows operating system.) Embeds a Zip file into an EXE as a custom resource. This resource can be opened by the EXE containing it at runtime by using the OpenMyEmbedded method.

Important: In Visual Studio 2010, the linker has a property "Randomized Base Address" (Project Properties/Linker) that defaults to "YES", but the default is "NO" in Visual Studio 2008. (The property is nonexistent in Visual Studio 2005 and earlier.) This enables ASLR ( Address Space Layout Randomization) in Vista and up, and prevents the proper code injection in the executable address space. To successfully embed a .zip as a resource within an EXE, this Visual Studio property must be set to "NO".

Returns 1 for success, 0 for failure.

# fileExtension is a string
CkZip_AddNoCompressExtension $fileExtension

Attempting to compress already-compressed data is usually a waste of CPU cycles with little or no benefit. In fact, it is possible that attempting to compress already-compressed data results in a slightly increased size. The Zip file format allows for files to be "stored" rather than compressed. This allows the file data to be streamed directly into a .zip without compression.

An instance of the Zip object has an internal list of "no compress" extensions. A filename with a "no compress" extension is "stored" rather than compressed. Additional "no compress" extensions may be added by calling this method (once per file extension). You should pass the file extension, such as ".xyz" in fileExtension.

"no compress" extensions may be removed by calling RemoveNoCompressExtension.

The default "no compress" extensions are: .zip, .gif, .jpg, .gz, .rar, .jar, .tgz, .bz2, .z, .rpm, .msi, .png

# returns a CkZipEntry
# fileName is a string
# encodedCompressedData is a string
set ret_zipEntry [CkZip_AppendBase64 $fileName $encodedCompressedData]

Creates a new Zip entry and initializes it with already-compressed data that is Base64 encoded. (The ZipEntry.CopyBase64 method can be used to retrieve the compressed data in Base64 format.)

Note 1: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Note 2: It is assumed that the compressed data is unencrypted deflated data. (Meaning data compressed using the "deflate" compression algorithm.)

Returns NULL on failure

# returns a CkZipEntry
# pathInZip is a string
# byteData is a CkBinData
set ret_zipEntry [CkZip_AppendBd $pathInZip $byteData]

Introduced in version 9.5.0.70

Appends the contents of byteData as a new entry to this zip object. The zip entry object containing the data is returned.

Returns NULL on failure

Backup Windows Current User / Personal Certificates to a .zip

# returns a CkZipEntry
# filename is a string
# inData is a CkByteData
set ret_zipEntry [CkZip_AppendCompressed $filename $inData]

Append memory data that is already Zip-compressed to the Zip object. The ZipEntry object containing the compressed data is returned. Note: This method appends the compressed data for a single zip entry. To load an entire in-memory .zip, call OpenFromMemory instead.

Note 1: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Note 2: It is assumed that the compressed data is unencrypted deflated data. (Meaning data compressed using the "deflate" compression algorithm.)

Returns NULL on failure

# returns a CkZipEntry
# fileName is a string
# inData is a CkByteData
set ret_zipEntry [CkZip_AppendData $fileName $inData]

Appends in-memory data as a new entry to a Zip object. The ZipEntry object containing the data is returned.

Note: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Returns NULL on failure

Create a Zip Entirely in Memory

# returns a CkZipEntry
# filename is a string
# encoding is a string
# data is a string
set ret_zipEntry [CkZip_AppendDataEncoded $filename $encoding $data]

Introduced in version 9.5.0.59

Appends in-memory data as a new entry to a Zip object. The filename is the filename of the entry as it will appear within the zip. The encoding is the encoding of the data, such as "base64", "hex", etc. The full list of encodings is listed at the web page linked below.

Returns the zip entry object.

Note: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Returns NULL on failure

Binary Encodings Supported by Chilkat

# filePattern is a string
# recurse is a boolean
set status [CkZip_AppendFiles $filePattern $recurse]

Appends one or more files to the Zip object. The filePattern can use the "*" wildcard character for 0 or more of any characterSet recurse equal to True to recursively add all subdirectories, or False to only add files in the current directory.

Note: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Returns 1 for success, 0 for failure.

Controlling paths within a Zip

# returns a CkTask
# filePattern is a string
# recurse is a boolean
set ret_task [CkZip_AppendFilesAsync $filePattern $recurse]

Creates an asynchronous task to call the AppendFiles method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# filePattern is a string
# recurse is a boolean
# saveExtraPath is a boolean
# archiveOnly is a boolean
# includeHidden is a boolean
# includeSystem is a boolean
set status [CkZip_AppendFilesEx $filePattern $recurse $saveExtraPath $archiveOnly $includeHidden $includeSystem]

Appends one or more files to the Zip object. The filePattern can use the "*" and "?" wildcard characters where "*" means 0 or more of any character and "?" means any single character. The recurse controls whether directories are recursively traversed. Set recurse equal to 1 to append files and subdirectories in the directory tree. Set recurse equal to 0 to add files only from the indicated directory.

The saveExtraPath only applies when the filePattern is an absolute path pattern, such as "C:/temp/abc/*.txt". If saveExtraPath is 1, then the absolute path will be included in the zip entry filenames as relative paths. For example, "temp/abc/xyz.txt".

The archiveOnly, archiveOnly, and includeHidden flags only apply when on the Windows operating system. These flags control whether files with the Archive, Hidden, or System attributes are included.

Note: This method does not write the zip archive. It simply adds references to the files that will be included in the .zip when the WriteZip or WriteZipAndClose methods are eventually called. Files and/or data may be added to the zip object by calling any combination of the Append* methods before finally writing the zip via one of the Write* methods.

Returns 1 for success, 0 for failure.

# returns a CkTask
# filePattern is a string
# recurse is a boolean
# saveExtraPath is a boolean
# archiveOnly is a boolean
# includeHidden is a boolean
# includeSystem is a boolean
set ret_task [CkZip_AppendFilesExAsync $filePattern $recurse $saveExtraPath $archiveOnly $includeHidden $includeSystem]

Creates an asynchronous task to call the AppendFilesEx method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# returns a CkZipEntry
# fileName is a string
# encodedCompressedData is a string
set ret_zipEntry [CkZip_AppendHex $fileName $encodedCompressedData]

Creates a new Zip entry and initializes it with already-compressed data that is hexidecimal encoded. (The ZipEntry.CopyHex method can be used to retrieve the compressed data in Hex format.)

Note 1: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Note 2: It is assumed that the compressed data is unencrypted deflated data. (Meaning data compressed using the "deflate" compression algorithm.)

Returns NULL on failure

# fileSpecs is a CkStringArray
# recurse is a boolean
set status [CkZip_AppendMultiple $fileSpecs $recurse]

This method is the same as calling AppendFiles multiple times - once for each file pattern in fileSpecs

Note: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Returns 1 for success, 0 for failure.

# returns a CkTask
# fileSpecs is a CkStringArray
# recurse is a boolean
set ret_task [CkZip_AppendMultipleAsync $fileSpecs $recurse]

Creates an asynchronous task to call the AppendMultiple method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# returns a CkZipEntry
# fileName is a string
set ret_zipEntry [CkZip_AppendNew $fileName]

Appends a new and empty entry to the Zip object and returns the ZipEntry object. Data can be appended to the entry by calling ZipEntry.AppendData.

Important: To append an already-existing file, call the AppendOneFileOrDir method. The AppendNew method inserts a new and empty file entry within the Zip object. The purpose of AppendNew is to either create an empty file within the Zip, or to create a new file entry which can then be filled with data by calling the entry's AppendData method.

Note: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Returns NULL on failure

# returns a CkZipEntry
# dirName is a string
set ret_zipEntry [CkZip_AppendNewDir $dirName]

Adds an entry to the zip so that when it unzips, a new directory (with no files) is created. The directory does not need to exist on the local filesystem when calling this method. The dirName is simply a string that is used as the directory path for the entry added to the zip. The zip entry object is returned.

Note: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Returns NULL on failure

# fileOrDirPath is a string
# saveExtraPath is a boolean
set status [CkZip_AppendOneFileOrDir $fileOrDirPath $saveExtraPath]

Appends a single file or directory to the Zip object. The saveExtraPath applies when fileOrDirPath is an absolute (non-relative) path. If saveExtraPath is 1, then the absolute path is made relative and saved in the zip. For example, if the fileOrDirPath is "C:/temp/xyz/test.txt" and saveExtraPath is 1, then the path in the zip will be "./temp/xyz/test.txt". If however, fileOrDirPath contains a relative path, then saveExtraPath has no effect.

Returns 1 for success, 0 for failure.

Set Entry Filepath (in output Zip) when Zipping

# returns a CkTask
# fileOrDirPath is a string
# saveExtraPath is a boolean
set ret_task [CkZip_AppendOneFileOrDirAsync $fileOrDirPath $saveExtraPath]

Creates an asynchronous task to call the AppendOneFileOrDir method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# returns a CkZipEntry
# internalZipFilepath is a string
# textData is a string
set ret_zipEntry [CkZip_AppendString $internalZipFilepath $textData]

Adds an in-memory string to the Zip object. The textData argument is converted to the ANSI charset before being added to the Zip. If the Zip were written to disk by calling WriteZip, and later unzipped, the entry would unzip to an ANSI text file.

Note: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Returns NULL on failure

# returns a CkZipEntry
# internalZipFilepath is a string
# textData is a string
# charset is a string
set ret_zipEntry [CkZip_AppendString2 $internalZipFilepath $textData $charset]

Same as AppendString, but allows the charset to be specified. The textData is converted to charset before being added to the zip. The internalZipFilepath is the path of the file that will be stored within the zip.

Note: This method only updates the zip object. To update (rewrite) a zip file, either the WriteZip or WriteZipAndClose method would need to be called.

Returns NULL on failure

Create a Zip Entirely in Memory

# zipFileName is a string
set status [CkZip_AppendZip $zipFileName]

Adds the contents of another existing Zip file to this Zip object.

Returns 1 for success, 0 for failure.

CkZip_CloseZip

Closes an open Zip file. This is identical to calling NewZip. (NewZip closes the current Zip file, if open, and initializes the Zip object to be empty. Zip files are only created when WriteZip is called.)

# entry is a CkZipEntry
set status [CkZip_DeleteEntry $entry]

Removes a Zip entry from the calling Zip object.

Returns 1 for success, 0 for failure.

Remove a File from a .zip

# dirName is a string
CkZip_ExcludeDir $dirName

Adds a directory name to be excluded when AppendFiles is called to add an entire directory tree. All directories having a name equal to an excluded directory will not be included when AppendFiles (or AppendFileEx) is called. Multiple directories can be excluded by calling ExcludeDir multiple times. The name comparison is case-insensitive.

# dirPath is a string
set status [CkZip_Extract $dirPath]

Unzip all the files into the specified directory. Subdirectories are automatically created as needed.

Returns 1 for success, 0 for failure.

# returns a CkTask
# dirPath is a string
set ret_task [CkZip_ExtractAsync $dirPath]

Creates an asynchronous task to call the Extract method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# exePath is a string
# dirPath is a string
set status [CkZip_ExtractExe $exePath $dirPath]

Introduced in version 9.5.0.44

Extracts files from a Chilkat produced self-extracting EXE into the specified directory. Subdirectories are automatically created as needed. If the self-extracting EXE is encrypted, be sure to set the DecryptPassword property prior to calling this method.

Returns 1 for success, 0 for failure.

# returns a CkTask
# exePath is a string
# dirPath is a string
set ret_task [CkZip_ExtractExeAsync $exePath $dirPath]

Introduced in version 9.5.0.44

Creates an asynchronous task to call the ExtractExe method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# dirPath is a string
set status [CkZip_ExtractInto $dirPath]

Unzips all the files in a Zip into a single directory regardless of the path stored in the Zip

Returns 1 for success, 0 for failure.

# dirPath is a string
# pattern is a string
set status [CkZip_ExtractMatching $dirPath $pattern]

Unzip all files matching a wildcard pattern.

Returns 1 for success, 0 for failure.

# dirPath is a string
set status [CkZip_ExtractNewer $dirPath]

Extracts only the files that have more recent last-modified-times than the files on disk. This allows you to easily refresh only the files that have been updated.

Returns 1 for success, 0 for failure.

# entry is a CkZipEntry
# dirPath is a string
set status [CkZip_ExtractOne $entry $dirPath]

This method is deprecated. It will be removed in a future version.

Identical to calling ZipEntry.Extract. This method is deprecated and the Extract method of the zip entry should be called instead.

Returns 1 for success, 0 for failure.

# returns a CkZipEntry
set ret_zipEntry [CkZip_FirstEntry]

Return the first entry in the Zip. Call ZipEntry.NextEntry to iterate over the entries in a Zip until a NULL is returned.

Returns NULL on failure

# returns a CkZipEntry
# pattern is a string
set ret_zipEntry [CkZip_FirstMatchingEntry $pattern]

Returns the first entry having a filename matching a pattern. The "*" characters matches 0 or more of any character. The full filename, including path, is used when matching against the pattern. A NULL is returned if nothing matches.

Returns NULL on failure

Iterate over Matching Filenames

# outXml is a CkString (output)
set status [CkZip_GetDirectoryAsXML $outStr]
set retStr [CkZip_getDirectoryAsXML $myZip]

Return the contents of the Zip file directory in an XML formatted string

Returns 1 for success, 0 for failure.

# returns a CkZipEntry
# entryID is an integer
set ret_zipEntry [CkZip_GetEntryByID $entryID]

Retrieves a ZipEntry by ID. Chilkat Zip.NET automatically assigns a unique ID to each ZipEntry in the Zip. This feature makes it easy to associate an item in a UI control with a ZipEntry.

Returns NULL on failure

# returns a CkZipEntry
# index is an integer
set ret_zipEntry [CkZip_GetEntryByIndex $index]

Retrieves a ZipEntry by index. The first entry is at index 0. This will return directory entries as well as files.

Returns NULL on failure

# returns a CkZipEntry
# entryName is a string
set ret_zipEntry [CkZip_GetEntryByName $entryName]

Returns a ZipEntry by filename. If a full or partial path is part of the filename, this must be included in the filename parameter.

Returns NULL on failure

Download a Zip from a URL and OpenFromMemory. (No .zip fie is created)

Set Entry Filepath (in output Zip) when Zipping

# returns a CkStringArray
set ret_stringArray [CkZip_GetExclusions]

Returns the current collection of exclusion patterns that have been set by SetExclusions.

Returns NULL on failure

# name is a string
# outStr is a CkString (output)
set status [CkZip_GetExeConfigParam $name $outStr]
set retStr [CkZip_getExeConfigParam $myZip $name]

(Relevant only when running on a Microsoft Windows operating system.) Gets the value of an EXE config param as described in the ExeXmlConfig property.

Returns 1 for success, 0 for failure.

# returns a CkZipEntry
# fileName is a string
# beforeIndex is an integer
set ret_zipEntry [CkZip_InsertNew $fileName $beforeIndex]

Inserts a new and empty entry into the Zip object. To insert at the beginning of the Zip, beforeIndex should be 0. The ZipEntry's FileName property is initialized to fileName parameter.

Returns NULL on failure

# fileExtension is a string
set retBool [CkZip_IsNoCompressExtension $fileExtension]

Returns 1 if the fileExtension is contained in the set of "no compress" extensions, otherwise returns 0. (See the documentation for the AddNoCompressExtension method.) The fileExtension may be passed with or without the ".". For example, both ".jpg" and "jpg" are acceptable.

# zipFilename is a string
set retBool [CkZip_IsPasswordProtected $zipFilename]

Return True if a Zip file is password protected

set retBool [CkZip_IsUnlocked]

Returns True if the class is already unlocked, otherwise returns False.

# zipFilePath is a string
set retBool [CkZip_NewZip $zipFilePath]

Clears and initializes the contents of the Zip object. If a Zip file was open, it is closed and all entries are removed from the object. The FileName property is set to the zipFilePath argument.

Chilkat Zip API Concepts

# binData is a CkBinData
set status [CkZip_OpenBd $binData]

Introduced in version 9.5.0.66

Open a Zip contained in binData.

When a zip is opened, the PasswordProtect and Encryption properties will be appropriately set. If the zip is password protected (i.e. uses older Zip 2.0 encrypion), then the PasswordProtect property will be set to 1. If the zip is strong encrypted, the Encryption property will be set to a value 1 through 4, where 4 indicates WinZip compatible AES encryption.

Returns 1 for success, 0 for failure.

Create Enveloping XML Digital Signature

# exeFilename is a string
# resourceName is a string
set status [CkZip_OpenEmbedded $exeFilename $resourceName]

(Relevant only when running on a Microsoft Windows operating system.) Opens a Zip embedded in an MS Windows EXE

Returns 1 for success, 0 for failure.

# byteData is a CkByteData
set status [CkZip_OpenFromByteData $byteData]

Same as OpenFromMemory.

When a zip is opened, the PasswordProtect and Encryption properties will be appropriately set. If the zip is password protected (i.e. uses older Zip 2.0 encrypion), then the PasswordProtect property will be set to 1. If the zip is strong encrypted, the Encryption property will be set to a value 1 through 4, where 4 indicates WinZip compatible AES encryption.

Returns 1 for success, 0 for failure.

# inData is a CkByteData
set status [CkZip_OpenFromMemory $inData]

Open a Zip that is completely in-memory. This allows for Zip files to be opened from non-filesystem sources, such as a database.

When a zip is opened, the PasswordProtect and Encryption properties will be appropriately set. If the zip is password protected (i.e. uses older Zip 2.0 encrypion), then the PasswordProtect property will be set to 1. If the zip is strong encrypted, the Encryption property will be set to a value 1 through 4, where 4 indicates WinZip compatible AES encryption.

Returns 1 for success, 0 for failure.

Download a Zip from a URL and OpenFromMemory. (No .zip fie is created)

# resourceName is a string
set status [CkZip_OpenMyEmbedded $resourceName]

(Relevant only when running on a Microsoft Windows operating system.) Opens a Zip embedded within the caller's MS Windows EXE.

Returns 1 for success, 0 for failure.

# zipPath is a string
set status [CkZip_OpenZip $zipPath]

Opens a Zip archive. Encrypted and password-protected zips may be opened without providing the password, but their contents may not be unzipped unless the correct password is provided via the DecryptPassword proprety, or the SetPassword method.

When a zip is opened, the PasswordProtect and Encryption properties will be appropriately set. If the zip is password protected (i.e. uses older Zip 2.0 encrypion), then the PasswordProtect property will be set to 1. If the zip is strong encrypted, the Encryption property will be set to a value 1 through 4, where 4 indicates WinZip compatible AES encryption.

Returns 1 for success, 0 for failure.

# returns a CkTask
# zipPath is a string
set ret_task [CkZip_OpenZipAsync $zipPath]

Creates an asynchronous task to call the OpenZip method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# ZipFileName is a string
set status [CkZip_QuickAppend $ZipFileName]

Efficiently appends additional files to an existing zip archive. QuickAppend leaves all entries in the existing .zip untouched. It operates by appending new files and updating the internal "central directory" of the zip archive.

Returns 1 for success, 0 for failure.

Append Files to Existing Zip w/out Rewriting Entire Zip

# returns a CkTask
# ZipFileName is a string
set ret_task [CkZip_QuickAppendAsync $ZipFileName]

Creates an asynchronous task to call the QuickAppend method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# exeFilename is a string
# resourceName is a string
set status [CkZip_RemoveEmbedded $exeFilename $resourceName]

(Relevant only when running on a Microsoft Windows operating system.) Removes an embedded Zip from an MS-Windows EXE

Returns 1 for success, 0 for failure.

# fileExtension is a string
CkZip_RemoveNoCompressExtension $fileExtension

Removes a file extension from the zip object's internal list of "no compress" extensions. (For more information, see AddNoCompressExtension.)

# exeFilename is a string
# resourceName is a string
# zipFilename is a string
set status [CkZip_ReplaceEmbedded $exeFilename $resourceName $zipFilename]

(Relevant only when running on a Microsoft Windows operating system.) Replace a Zip embedded in an MS-Windows EXE with another Zip file.

Returns 1 for success, 0 for failure.

# path is a string
set status [CkZip_SaveLastError $path]

Saves the last-error information (the contents of LastErrorXml) to an XML formatted file.

Returns 1 for success, 0 for failure.

# level is an integer
CkZip_SetCompressionLevel $level

Sets the compression level for all file and data entries. The compression level for a mapped entry (i.e. an entry that is contained within an opened .zip, cannot be changed.) The default compression level is 6. A compression level of 0 is equivalent to no compression. The maximum compression level is 9.

The zip.SetCompressionLevel method must be called after appending the files (i.e. after the calls to AppendFile*, AppendData, or AppendOneFileOrDir).

A single call to SetCompressionLevel will set the compression level for all existing file and data entries.

# excludePatterns is a CkStringArray
CkZip_SetExclusions $excludePatterns

Specify a collection of exclusion patterns to be used when adding files to a Zip. Each pattern in the collection can use the "*" wildcard character, where "*" indicates 0 or more occurrences of any character.

# paramName is a string
# paramValue is a string
CkZip_SetExeConfigParam $paramName $paramValue

Sets a self-extractor property that is embedded in the resultant EXE created by the WriteExe or WriteExe2 methods. The paramName is one of the XML tags listed in the ExeXmlConfig property.

For example, to specify the text for the self-extractor's main dialog unzip button, paramName would be "MainUnzipBtn".

# password is a string
CkZip_SetPassword $password

Set the password for an encrypted or password-protected Zip.

# regCode is a string
set status [CkZip_UnlockComponent $regCode]

Unlocks the component allowing for the full functionality to be used. If a purchased unlock code is passed, there is no expiration. Any other string automatically begins a fully-functional 30-day trial the first time UnlockComponent is called.

Returns 1 for success, 0 for failure.

Diagnosing UnlockComponent Problems

UnlockComponent LastErrorText shows exact string passed to it.

Verify UnlockComponent Success w/ Purchased Unlock Code

LastErrorText Standard Information

# dirPath is a string
set retInt [CkZip_Unzip $dirPath]

Unzips and returns the number of files unzipped, or -1 if a failure occurs. Subdirectories are automatically created during the unzipping process.

# returns a CkTask
# dirPath is a string
set ret_task [CkZip_UnzipAsync $dirPath]

Creates an asynchronous task to call the Unzip method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# dirPath is a string
set retInt [CkZip_UnzipInto $dirPath]

Unzips and returns the number of files unzipped, or -1 if a failure occurs. All files in the Zip are unzipped into the specfied dirPath regardless of the directory path information contained in the Zip. This has the effect of collapsing all files into a single directory. If several files in the Zip have the same name, the files unzipped last will overwrite the files already unzipped.

# returns a CkTask
# dirPath is a string
set ret_task [CkZip_UnzipIntoAsync $dirPath]

Creates an asynchronous task to call the UnzipInto method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# dirPath is a string
# pattern is a string
# verbose is a boolean
set retInt [CkZip_UnzipMatching $dirPath $pattern $verbose]

Same as Unzip, but only unzips files matching a pattern. If no wildcard characters ('*') are used, then only files that exactly match the pattern will be unzipped. The "*" characters matches 0 or more of any character.

Unzip Files Matching a Pattern (such as *.xml)

# returns a CkTask
# dirPath is a string
# pattern is a string
# verbose is a boolean
set ret_task [CkZip_UnzipMatchingAsync $dirPath $pattern $verbose]

Creates an asynchronous task to call the UnzipMatching method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# dirPath is a string
# pattern is a string
# verbose is a boolean
set retInt [CkZip_UnzipMatchingInto $dirPath $pattern $verbose]

Unzips matching files into a single directory, ignoring all path information stored in the Zip.

# returns a CkTask
# dirPath is a string
# pattern is a string
# verbose is a boolean
set ret_task [CkZip_UnzipMatchingIntoAsync $dirPath $pattern $verbose]

Creates an asynchronous task to call the UnzipMatchingInto method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# dirPath is a string
set retInt [CkZip_UnzipNewer $dirPath]

Same as Unzip, but only files that don't already exist on disk, or have later file modification dates are unzipped.

# returns a CkTask
# dirPath is a string
set ret_task [CkZip_UnzipNewerAsync $dirPath]

Creates an asynchronous task to call the UnzipNewer method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

set retBool [CkZip_VerifyPassword]

Tests the current DecryptPassword setting against the currently opened zip. Returns 1 if the password is valid, otherwise returns 0.

Verify a Zip's Password

# binData is a CkBinData
set status [CkZip_WriteBd $binData]

Introduced in version 9.5.0.66

Same as WriteZip, but instead of writing the Zip to a file, it writes to binData. Zips that are written to binData can be opened by calling OpenBd. Note: Both WriteBd and OpenBd are added in Chilkat v9.5.0.66

Returns 1 for success, 0 for failure.

# returns a CkTask
# binData is a CkBinData
set ret_task [CkZip_WriteBdAsync $binData]

Introduced in version 9.5.0.66

Creates an asynchronous task to call the WriteBd method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

# exeFilename is a string
set status [CkZip_WriteExe $exeFilename]

(Relevant only when running on a Microsoft Windows operating system.) Writes an MS-Windows self-extracting executable. There are no limitations on the total size, individual file size, or number of files that can be added to a self-extracting EXE.

If the resultant EXE will automatically accept these command-line arguments when run:

-log logFileName
Creates a log file that lists the settings embedded within the EXE and logs the errors, warnings, and other information about the self-extraction.
-unzipDir unzipDirectoryPath
Unzips to this directory path without user intervention.
-pwd password
Specifies the password for an encrypted EXE
-ap autoRunParams
Specifies the command line parameters to be passed to the AutoRun executable (embedded within the EXE).

Returns 1 for success, 0 for failure.

More information about self-extracting executables.

Create Self-Extractor

# outBytes is a CkByteData (output)
set status [CkZip_WriteExeToMemory $outData]

(Relevant only when running on a Microsoft Windows operating system.) Same as WriteExe, but instead of writing a file, the MS-Windows EXE is written to memory.

Returns 1 for success, 0 for failure.

More information about self-extracting executables.

# outData is a CkByteData (output)
set status [CkZip_WriteToMemory $outData]

Same as WriteZip, but instead of writing the Zip to a file, it writes to memory. Zips that are written to memory can also be opened from memory by calling OpenFromMemory.

Returns 1 for success, 0 for failure.

Create a Zip Entirely in Memory

# returns a CkTask
set ret_task [CkZip_WriteToMemoryAsync]

Creates an asynchronous task to call the WriteToMemory method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

set status [CkZip_WriteZip]

Saves the Zip to a file and implictly re-opens it so further operations can continue. Use WriteZipAndClose to write and close the Zip. There is no limitation on the size of files that may be contained within a .zip, the total number of files in a .zip, or the total size of a .zip. If necessary, WriteZip will use the ZIP64 file format extensions when 4GB or file count limitations of the old zip file format are exceeded.

Returns 1 for success, 0 for failure.

# returns a CkTask
set ret_task [CkZip_WriteZipAsync]

Creates an asynchronous task to call the WriteZip method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task

set status [CkZip_WriteZipAndClose]

Saves the Zip to a file and closes it. On return, the Zip object will be in the state as if NewZip had been called. There is no limitation on the size of files that may be contained within a .zip, the total number of files in a .zip, or the total size of a .zip. If necessary, WriteZip will use the ZIP64 file format extensions when 4GB or file count limitations of the old zip file format are exceeded.

Returns 1 for success, 0 for failure.

# returns a CkTask
set ret_task [CkZip_WriteZipAndCloseAsync]

Creates an asynchronous task to call the WriteZipAndClose method with the arguments provided. (Async methods are available starting in Chilkat v9.5.0.52.)

Returns NULL on failure

How to Run an Asynchronous Task