FileAccess Rust Reference Documentation

FileAccess

Current Version: 11.6.1

Chilkat.FileAccess

Read, write, compare, copy, split, inspect, and manage files and paths.

Chilkat.FileAccess provides general-purpose file-system utilities for applications that need direct control over files, directories, paths, timestamps, and low-level file operations. It can read, write, append, seek, compare, copy, rename, delete, split, reassemble, and inspect files, and also includes helpers for directory operations, path parsing, symbolic links, temporary filenames, block-based reading, fragment scanning, text replacement, and open-file access.

Read and write files

Load or save text and binary files, append data, replace file contents, and work with explicit character encodings when needed.

File management

Copy, rename, delete, compare, split, reassemble, and inspect files using straightforward file-system utility methods.

Directories and paths

Create, remove, check, and work with directories, and use path helpers to extract filenames, extensions, directory names, and related path parts.

Open-file operations

Open files for lower-level reading or writing, seek within files, read blocks, and process large files without loading everything at once.

Timestamps and metadata

Get or set file times, inspect sizes and existence, and use metadata helpers when coordinating file processing workflows.

Special file utilities

Generate temporary filenames, work with symbolic links, scan for byte fragments, and perform text replacement in files.

Common pattern: Use FileAccess for local file-system tasks that are outside the scope of a specific protocol class. It is especially useful for preparing files before upload, saving downloaded data, comparing or splitting files, reading large files in blocks, manipulating paths, or performing small filesystem operations without using platform-specific APIs.

For an extended overview, see FileAccess Class Overview.

Object Creation

// Cargo.toml:
//     [dependencies]
//     chilkat = "11.6"

use chilkat::FileAccess;

// Once per process, before any other Chilkat call:
chilkat::unlock_bundle("Anything for 30-day trial")?;  // shorthand for Global::new().unlock_bundle(..)

let file_access = FileAccess::new();
// ... the native object is freed when `file_access` goes out of scope.
pub fn new() -> FileAccess

Creates the underlying native Chilkat object (FileAccess also implements Default). Every method takes &self, so the object never needs to be declared mut. A FileAccess is Send but not Sync: it may be moved to another thread, but a reference to it cannot be shared between threads at the same time.

impl Drop for FileAccess

The native object is freed when the FileAccess is dropped — when it goes out of scope, or explicitly with drop(file_access). There is no Dispose method to call.

Errors

Methods that can fail return chilkat::Result<T>, which is Result<T, chilkat::Error>: a method whose only outcome is success or failure returns Result<()>, a method producing a string or an object returns Result<String> or Result<FileAccess>. The error carries the object's LastErrorText at the time of the failure (Error::last_error_text), the class and method names, and implements std::error::Error, so ? works in any function returning chilkat::Result or a Box<dyn Error>. Properties never fail, and methods that answer a question (has_..., is_..., ...) return a plain bool.

match file_access.some_method(...) {
    Ok(value) => println!("{value:?}"),
    Err(e) => eprintln!("{}", e.last_error_text()),
}

Properties

CurrentDir
// read-only
pub fn current_dir(&self) -> String

Returns the current working directory of the calling process. Relative file and directory paths are resolved against this process-wide working directory.

Process-wide setting: The working directory belongs to the process, not to an individual FileAccess object. Changing it can therefore affect relative-path behavior elsewhere in the application.

top
DebugLogFilePath
// read/write
pub fn debug_log_file_path(&self) -> String
pub fn set_debug_log_file_path(&self, value: &str)

If set to a file path, this property logs the LastErrorText of each Chilkat method or property call to the specified file. This logging helps identify the context and history of Chilkat calls leading up to any crash or hang, aiding in debugging.

Enabling the VerboseLogging property provides more detailed information. This property is mainly used for debugging rare instances where a Chilkat method call causes a hang or crash, which should generally not happen.

Possible causes of hangs include:

  • A timeout property set to 0, indicating an infinite timeout.
  • A hang occurring within an event callback in the application code.
  • An internal bug in the Chilkat code causing the hang.

More Information and Examples
Example showing how to use DebugLogFilePath.
top
EndOfFile
// read-only
pub fn end_of_file(&self) -> bool

Returns true when the currently open file is positioned at end-of-file; otherwise returns false.

Open-file state: This property applies to the file opened by OpenForRead, OpenForWrite, OpenForReadWrite, OpenForAppend, or FileOpen.

top
FileOpenError
// read-only
pub fn file_open_error(&self) -> i32

Provides the detailed open-error code from the most recent call to FileOpen, OpenForRead, OpenForWrite, OpenForReadWrite, or OpenForAppend.

CodeMeaning
0Success; no open error.
1Access denied.
2File not found.
3General, non-specific open error.
4File already exists.
5The path refers to a directory and the requested access involves writing.
6Too many symbolic links were encountered while resolving the path.
7The process already has the maximum number of files open.
8The pathname is too long.
9The system-wide limit on open files has been reached.
10The pathname refers to a device special file for which no corresponding device exists.
11Insufficient kernel memory was available.
12A file was to be created, but the containing device has no space available.
13A pathname component expected to be a directory is not a directory.
14The regular file is too large to be opened because of an operating-system limitation.
15The path is on a read-only filesystem and write access was requested.
Use with FileOpenErrorMsg: FileOpenError is useful for programmatic handling; FileOpenErrorMsg provides the corresponding human-readable message.

top
FileOpenErrorMsg
// read-only
pub fn file_open_error_msg(&self) -> String

Returns the human-readable message corresponding to FileOpenError for the most recent file-open attempt.

top
LastErrorHtml
// read-only
pub fn last_error_html(&self) -> String

Provides HTML-formatted information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

top
LastErrorText
// read-only
pub fn last_error_text(&self) -> String

Provides plain text information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

More Information and Examples
Concept of LastErrorTextLastErrorText Standard Information
top
LastErrorXml
// read-only
pub fn last_error_xml(&self) -> String

Provides XML-formatted information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

top
LastMethodSuccess
// read/write
pub fn last_method_success(&self) -> bool
pub fn set_last_method_success(&self, value: bool)

Indicates the success or failure of the most recent method call: true means success, false means failure. This property remains unchanged by property setters or getters. This method is present to address challenges in checking for null or Nothing returns in certain programming languages. Note: This property does not apply to methods that return integer values or to boolean-returning methods where the boolean does not indicate success or failure.

top
LockFileOnOpen
// read/write
pub fn lock_file_on_open(&self) -> bool
pub fn set_lock_file_on_open(&self, value: bool)
Introduced in version 9.5.0.80

Windows only. If true, OpenForAppend, OpenForRead, OpenForReadWrite, and OpenForWrite request exclusive access to the file. Other processes are prevented from opening the file until FileClose releases the handle. The default is false.

File sharing: Windows file sharing is established when the file handle is opened. Set this property before calling an OpenFor* method.

top
VerboseLogging
// read/write
pub fn verbose_logging(&self) -> bool
pub fn set_verbose_logging(&self, value: bool)

If set to true, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. The default value is false. Verbose logging should only be used for debugging. The potentially large quantity of logged information may adversely affect peformance.

top
Version
// read-only
pub fn version(&self) -> String

Version of the component/library, such as "10.1.0"

More Information and Examples
How to get the Chilkat version at runtime.
top

Methods

AppendAnsi
pub fn append_ansi(&self, text: &str) -> Result<()>

Appends text to the currently open file after converting the string to the legacy ANSI character encoding used by Chilkat for the platform.

Character encoding: Use AppendText or AppendSb when an explicit encoding such as utf-8 is preferred.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
AppendBd
pub fn append_bd(&self, bd: &BinData) -> Result<()>
Introduced in version 9.5.0.76

Appends all bytes contained in bd to the currently open file without text conversion.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
AppendSb
pub fn append_sb(&self, sb: &StringBuilder, charset: &str) -> Result<()>
Introduced in version 9.5.0.76

Appends the text contained in sb to the currently open file using the character encoding specified by charset.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
AppendText
pub fn append_text(&self, str: &str, charset: &str) -> Result<()>

Appends str to the currently open file after encoding the text with the character set named by charset, such as utf-8 or iso-8859-1.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
AppendUnicodeBOM
pub fn append_unicode_bom(&self) -> Result<()>

Appends the UTF-16 little-endian byte-order mark to the currently open file. The two bytes written are FF FE.

BOM placement: A BOM normally belongs at the beginning of a text file. This method appends bytes at the current write position, so call it before writing text when creating a new UTF-16LE file.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
AppendUtf8BOM
pub fn append_utf8_bom(&self) -> Result<()>

Appends the UTF-8 byte-order mark to the currently open file. The three bytes written are EF BB BF.

UTF-8 BOM: A UTF-8 BOM is optional. Some software uses it as an encoding signature, while other software expects BOM-less UTF-8.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
DirAutoCreate
pub fn dir_auto_create(&self, file_path: &str) -> Result<()>

Ensures that the directory portion of filePath exists. Any missing parent directories are created; the final path component is treated as a filename and is not created as a directory.

Difference from DirEnsureExists: Use DirAutoCreate when you have a file path. Use DirEnsureExists when the argument itself is a directory path.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
DirCreate
pub fn dir_create(&self, dir_path: &str) -> Result<()>

Creates the directory specified by dirPath. Parent directories must already exist; use DirEnsureExists when missing parent directories should also be created.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
DirDelete
pub fn dir_delete(&self, dir_path: &str) -> Result<()>

Deletes the directory specified by dirPath. The directory must be empty; use TreeDelete to recursively delete a directory and its contents.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
DirEnsureExists
pub fn dir_ensure_exists(&self, dir_path: &str) -> Result<()>

Ensures that the complete directory path dirPath exists, creating missing directories along the path as needed.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
DirExists
pub fn dir_exists(&self, dir_path: &str) -> bool
Introduced in version 10.0.0

Returns true if dirPath exists as a directory; otherwise returns false.

top
FileClose
pub fn file_close(&self)

Closes the currently open file and releases its operating-system file handle. Any exclusive lock obtained through LockFileOnOpen is released at this time.

top
FileContentsEqual
pub fn file_contents_equal(&self, file_path1: &str, file_path2: &str) -> bool

Compares filePath1 and filePath2 byte-for-byte and returns true only when their contents are identical. File sizes are compared first; when sizes match, the files are compared incrementally rather than being loaded entirely into memory.

Binary comparison: The comparison is byte-oriented. Text encodings, line-ending conventions, and Unicode normalization are not interpreted or normalized.
top
FileCopy
pub fn file_copy(&self, existing_filepath: &str, new_filepath: &str, fail_if_exists: bool) -> Result<()>

Copies existingFilepath to newFilepath. If failIfExists is true and the destination already exists, the copy fails instead of overwriting it.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
FileDelete
pub fn file_delete(&self, file_path: &str) -> Result<()>

Deletes the file specified by filePath.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
FileExists
pub fn file_exists(&self, file_path: &str) -> bool

Returns true if filePath exists; otherwise returns false. Use FileExists3 when the application must distinguish "does not exist" from "could not determine because of an error."

top
FileExists3
pub fn file_exists3(&self, path: &str) -> i32
Introduced in version 9.5.0.45

Checks whether path exists and returns a three-state result: 1 if it exists, 0 if it does not exist, and -1 if Chilkat could not determine the result because of permissions or another filesystem error.

top
FileOpen
pub fn file_open(&self, file_path: &str, access_mode: u32, share_mode: u32, create_disposition: u32, attributes: u32) -> Result<()>

Windows-specific low-level open. Opens filePath using arguments modeled after the Win32 CreateFile API. For portable code, prefer OpenForRead, OpenForWrite, OpenForReadWrite, or OpenForAppend.

CategoryCommon values
AccessGENERIC_READ = 0x80000000, GENERIC_WRITE = 0x40000000
SharingFILE_SHARE_READ = 0x1, FILE_SHARE_WRITE = 0x2
DispositionCREATE_NEW=1, CREATE_ALWAYS=2, OPEN_EXISTING=3, OPEN_ALWAYS=4, TRUNCATE_EXISTING=5
Open failures: When this method fails, inspect FileOpenError and FileOpenErrorMsg for the reason.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
FileReadBd
pub fn file_read_bd(&self, max_num_bytes: i32, bin_data: &BinData) -> Result<()>
Introduced in version 9.5.0.64

Reads up to maxNumBytes bytes from the current file position and appends the bytes to binData. The file position advances by the number of bytes read.

Destination behavior: Existing bytes already present in binData are preserved; newly read bytes are appended.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

More Information and Examples
Determine File Type from Binary Content of FileLoad Entire File into BinData
top
FileRename
pub fn file_rename(&self, existing_filepath: &str, new_filepath: &str) -> Result<()>

Renames or moves existingFilepath to newFilepath using the local filesystem.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
FileSeek
pub fn file_seek(&self, offset: i32, origin: i32) -> Result<()>

Moves the current file position by offset bytes relative to origin.

0Offset from the beginning of the file.
1Offset from the current file position.
2Offset from end-of-file; negative offsets are commonly used.
Random access: Seeking changes where the next read or write occurs; it does not itself read, write, or resize the file.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
FileSize
pub fn file_size(&self, file_path: &str) -> i32

Returns the file size in bytes as a signed 32-bit integer, or -1 on failure.

Large files: A signed 32-bit result cannot represent files larger than approximately 2 GB. Use FileSize64 or FileSizeStr for large files.
top
FileSize64
pub fn file_size64(&self, file_path: &str) -> i64
Introduced in version 9.5.0.88

Returns the size of filePath in bytes as a signed 64-bit integer, or -1 on failure.

top
FileSizeStr
pub fn file_size_str(&self, file_path: &str) -> Result<String>
Introduced in version 9.5.0.80

Returns the size of filePath in bytes as a decimal string. This avoids the range limitation of a 32-bit integer return value.

Returns Err(chilkat::Error) on failure.

top
FileType
pub fn file_type(&self, path: &str) -> i32
Introduced in version 9.5.0.77

Examines path and classifies the filesystem entry.

-1Unable to determine because of permissions or another error.
0Does not exist.
1Regular file.
2Directory.
3Symbolic link.
4Windows shortcut.
99Another filesystem type.
Future values: Additional file-type codes may be added in future versions as needed.
More Information and Examples
Determine File Type
top
FileWrite2
pub fn file_write2(&self, byte_data: &[u8]) -> Result<()>
Introduced in version 9.5.0.82

Writes exactly szByteData bytes beginning at pByteData to the currently open file at the current file position.

C++ buffer contract: The caller must supply a valid readable buffer containing at least szByteData bytes.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
FileWriteBd
pub fn file_write_bd(&self, bin_data: &BinData, offset: i32, num_bytes: i32) -> Result<()>
Introduced in version 9.5.0.64

Writes bytes from binData to the currently open file. offset selects the starting byte within the BinData; numBytes selects how many bytes to write. Set both to 0 to write the entire BinData, or set numBytes to 0 to write all remaining bytes beginning at offset.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
GenBlockId
pub fn gen_block_id(&self, index: i32, length: i32, encoding: &str) -> Result<String>
Introduced in version 9.5.0.58

Generates a fixed-width decimal block identifier from index, padded to length characters, and then encodes those bytes using encoding (for example base64, hex, or ascii). This utility was originally added for block-oriented uploads such as Azure Blob block uploads.

Ordering: Fixed-width decimal identifiers preserve numeric ordering when identifiers are compared lexically, provided the chosen width is large enough for all indexes.

Returns Err(chilkat::Error) on failure.

top
GetDirectoryName
pub fn get_directory_name(&self, path: &str) -> Result<String>
Introduced in version 9.5.0.64

Returns the directory portion of path according to Chilkat path-parsing rules.

GetDirectoryName('C:\MyDir\MySubDir\myfile.ext')  ->  'C:\MyDir\MySubDir\'
GetDirectoryName('C:\MyDir\MySubDir')             ->  'C:\MyDir\'
GetDirectoryName('C:\')                             ->  'C:\'

Returns Err(chilkat::Error) on failure.

More Information and Examples
Demonstrate Directory Path Functions
top
GetExtension
pub fn get_extension(&self, path: &str) -> Result<String>
Introduced in version 9.5.0.64

Returns the filename extension portion of path, including the leading period. A period appearing only in a directory name is not treated as the file extension.

GetExtension('C:\mydir.old\myfile.ext')  ->  '.ext'
GetExtension('C:\mydir.old\')            ->  ''

Returns Err(chilkat::Error) on failure.

More Information and Examples
Demonstrate Directory Path Functions
top
GetFileName
pub fn get_file_name(&self, path: &str) -> Result<String>
Introduced in version 9.5.0.64

Returns the final filename component of path, including its extension. If the path ends with a directory separator, the returned filename is empty.

GetFileName('C:\mydir\myfile.ext')  ->  'myfile.ext'
GetFileName('C:\mydir\')            ->  ''

Returns Err(chilkat::Error) on failure.

More Information and Examples
Demonstrate Directory Path Functions
top
GetFileNameWithoutExtension
pub fn get_file_name_without_extension(&self, path: &str) -> Result<String>
Introduced in version 9.5.0.64

Returns the final filename component of path with its extension removed. If path ends with a directory separator, the returned value is empty.

GetFileNameWithoutExtension('C:\mydir\myfile.ext')  ->  'myfile'
GetFileNameWithoutExtension('C:\mydir\')            ->  ''

Returns Err(chilkat::Error) on failure.

More Information and Examples
Demonstrate Directory Path Functions
top
GetFileTimeStr
pub fn get_file_time_str(&self, path: &str, which: i32) -> Result<String>
Introduced in version 11.0.0

Returns one file timestamp as an ISO 8601 UTC string in the form YYYY-MM-DDTHH:MM:SSZ. The which argument selects 0 = last-modified, 1 = last-access, or 2 = creation.

Portability: Creation/birth time is not available on every filesystem. The documented Chilkat behavior on Linux is to return the last-modified time when creation time is unavailable.

Returns Err(chilkat::Error) on failure.

top
GetNumBlocks
pub fn get_num_blocks(&self, block_size: i32) -> i32
Introduced in version 9.5.0.58

Returns how many blockSize-byte blocks are required to cover the currently open file. A partial final block counts as one block. Returns 0 for an empty file and -1 if no file is open.

Calculation: Conceptually this is ceil(fileSize / blockSize) for a non-empty file.
More Information and Examples
SFTP Upload Large File in Parts
top
GetTempFilename
pub fn get_temp_filename(&self, dir_path: &str, prefix: &str) -> Result<String>

Generates a temporary pathname in dirPath using prefix and a random alphanumeric suffix, in the general form prefix_xxxx.TMP. The returned pathname is guaranteed not to already exist at the time it is generated.

Returns Err(chilkat::Error) on failure.

top
OpenForAppend
pub fn open_for_append(&self, file_path: &str) -> Result<()>

Opens filePath for writing at end-of-file. The file is created if it does not exist. Existing content is preserved, and the initial file position is at the end.

Open failures: If the open/create operation fails, inspect FileOpenError and FileOpenErrorMsg. On Windows, LockFileOnOpen can request exclusive access for this method.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
OpenForRead
pub fn open_for_read(&self, file_path: &str) -> Result<()>

Opens an existing filePath for reading. The file may contain text or binary data and must already exist.

Open failures: If the open/create operation fails, inspect FileOpenError and FileOpenErrorMsg. On Windows, LockFileOnOpen can request exclusive access for this method.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

More Information and Examples
Load Entire File into BinData
top
OpenForReadWrite
pub fn open_for_read_write(&self, file_path: &str) -> Result<()>

Opens filePath for both reading and writing. The file is created if necessary. Existing content is preserved, and the initial file position is at the beginning.

Open failures: If the open/create operation fails, inspect FileOpenError and FileOpenErrorMsg. On Windows, LockFileOnOpen can request exclusive access for this method.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
OpenForWrite
pub fn open_for_write(&self, file_path: &str) -> Result<()>

Opens filePath for writing. The file is created if necessary; if it already exists, it is truncated to zero length when opened.

Open failures: If the open/create operation fails, inspect FileOpenError and FileOpenErrorMsg. On Windows, LockFileOnOpen can request exclusive access for this method.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
ReadBinaryToEncoded
pub fn read_binary_to_encoded(&self, file_path: &str, encoding: &str) -> Result<String>

Reads the entire file at filePath as binary data and returns an encoded textual representation. Supported encoding names documented for this method include base64, hex, qp, and url.

Encoding is not encryption: These encodings transform bytes into text; they do not provide confidentiality.

Returns Err(chilkat::Error) on failure.

More Information and Examples
Base64 Encode a File
top
ReadBlockBd
pub fn read_block_bd(&self, block_index: i32, block_size: i32, bd: &BinData) -> Result<()>
Introduced in version 9.5.0.79

Reads the zero-based block blockIndex from the currently open file, using blockSize bytes per block, and appends the bytes to bd. A partial final block is appended at its actual length.

Destination behavior: Existing contents of bd are preserved; the block bytes are appended.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

More Information and Examples
Dropbox Content HashSFTP Upload Large File in Parts
top
ReadEntireTextFile
pub fn read_entire_text_file(&self, file_path: &str, charset: &str) -> Result<String>

Reads the entire file at filePath, decodes its bytes using charset, and returns the resulting text.

Charset matters: The charset controls byte-to-character conversion. Use the encoding that actually represents the file; incorrect charset selection can produce incorrect text or conversion failure.

Returns Err(chilkat::Error) on failure.

top
ReadNextFragment
pub fn read_next_fragment(&self, start_at_beginning: bool, begin_marker: &str, end_marker: &str, charset: &str, sb: &StringBuilder) -> i32
Introduced in version 9.5.0.80

Scans the currently open file for the next text fragment beginning with beginMarker and ending with endMarker. The matched fragment, including both markers, is decoded using charset and appended to sb. If startAtBeginning is true, scanning restarts at the beginning of the file; otherwise it continues after the previously matched fragment.

1A fragment was found and appended.
0No matching fragment was found.
-1An error occurred while reading.
More Information and Examples
Efficiently Process a Huge XML File
top
ReassembleFile
pub fn reassemble_file(&self, parts_dir_path: &str, part_prefix: &str, part_extension: &str, reassembled_filename: &str) -> Result<()>

Reassembles a file previously divided by SplitFile. Parts are read from partsDirPath using the supplied partPrefix and partExtension, and the combined bytes are written to reassembledFilename.

Byte-for-byte reconstruction: Reassembly is a binary operation; no text decoding or newline conversion is performed.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

More Information and Examples
Example: Reassemble a Previously Split File
top
ReplaceStrings
pub fn replace_strings(&self, file_path: &str, charset: &str, existing_string: &str, replacement_string: &str) -> i32

Reads the file at filePath as text using charset, replaces occurrences of existingString with replacementString, writes the updated text back to the file, and returns the number of replacements made.

Text operation: This is character-based replacement after decoding the file. It is not suitable for arbitrary binary files.
top
SetCurrentDir
pub fn set_current_dir(&self, dir_path: &str) -> Result<()>

Changes the current working directory of the calling process to dirPath.

Process-wide effect: The current directory is normally process-wide, so changing it can affect relative paths used by other code or threads. Absolute paths avoid that dependency.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
SetFileTimes
pub fn set_file_times(&self, file_path: &str, create_time: &DateTime, last_access_time: &DateTime, last_mod_time: &DateTime) -> Result<()>

Sets the creation, last-access, and last-modified timestamps for filePath from the supplied CkDateTime objects. On filesystems that do not support a creation/birth time, createTime is ignored.

Filesystem differences: Timestamp availability and precision are filesystem- and operating-system-dependent.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
SetLastModified
pub fn set_last_modified(&self, file_path: &str, last_modified: &DateTime) -> Result<()>

Sets the last-modified timestamp of filePath from lastModified. The precision actually stored depends on the underlying filesystem.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
SplitFile
pub fn split_file(&self, file_to_split: &str, part_prefix: &str, part_extension: &str, part_size: i32, dest_dir: &str) -> Result<()>

Splits fileToSplit into sequential binary parts of up to partSize bytes and writes them to destDir using partPrefix and partExtension. Use ReassembleFile to reconstruct the original file.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

More Information and Examples
Example: Split File into Chunks
top
SymlinkCreate
pub fn symlink_create(&self, target_path: &str, link_path: &str) -> Result<()>
Introduced in version 9.5.0.77

Creates a symbolic link at linkPath that refers to targetPath.

Windows note: A Windows symbolic link is not the same as a Windows shortcut. Windows may require elevated privileges or an operating-system configuration such as Developer Mode that permits unprivileged symbolic-link creation, depending on system policy and how the application is launched.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

More Information and Examples
Create Symbolic Link
top
SymlinkTarget
pub fn symlink_target(&self, link_path: &str) -> Result<String>
Introduced in version 9.5.0.77

Returns the resolved target pathname for the symbolic link at linkPath. On Windows, this method also understands Windows shortcut (.lnk) files and returns the absolute target path.

Link vs. target: A symbolic link is a filesystem object that refers to another path. A Windows shortcut is a separate shell-file format; Chilkat supports both here even though they are different mechanisms.

Returns Err(chilkat::Error) on failure.

More Information and Examples
Get the Target of a Symbolic LinkGet the Target of a Windows Shortcut
top
TreeDelete
pub fn tree_delete(&self, path: &str) -> Result<()>

Recursively deletes the directory tree rooted at path, including contained files and subdirectories.

Destructive operation: This operation is recursive and destructive. Ensure path identifies the intended tree before calling it.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
Truncate
pub fn truncate(&self) -> Result<()>
Introduced in version 9.5.0.80

Truncates the currently open file at the current file position. Bytes at and after that position are removed, making the current position the new end-of-file.

Use with FileSeek: A common pattern is to seek to the desired new length and then call Truncate.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

top
WriteEntireTextFile
pub fn write_entire_text_file(&self, file_path: &str, text_data: &str, charset: &str, included_preamble: bool) -> Result<()>

Creates or opens filePath, encodes textData using charset, writes the resulting bytes, and closes the file. Existing file content is replaced. If includePreamble is true, an appropriate preamble/BOM is included for encodings such as UTF-8 or UTF-16.

BOM terminology: A BOM is part of the byte representation of the text file; it is not part of the application string itself.

Returns Ok(()) for success, Err(chilkat::Error) for failure.

More Information and Examples
Base64 Encode a File
top